cardoso5fr
Well-Known Member
A small neck knife. I used simply file and dremel (angle grinder to cut the steel) Differential oil hardening
XC75 3mm thick
16,5cm long
7 cm sharp and 9cm of handle
G10 handle , 17mm thick
Cardofaction of the back and below of the handle in order to have something "new old".
The G10 cove not all the heel in order to be able to hit the heel if the blade is in a wood piece
ABS sheath with a leather piece to be able to horizontal carry.
XC75 3mm thick
16,5cm long
7 cm sharp and 9cm of handle
G10 handle , 17mm thick
Cardofaction of the back and below of the handle in order to have something "new old".
The G10 cove not all the heel in order to be able to hit the heel if the blade is in a wood piece
ABS sheath with a leather piece to be able to horizontal carry.