murphda2
Super Moderator and KD Blade Show Boss
Next week I will be giving away a knife. I hope whoever wins it will push it to its limits and give constructive critisim about the quality of my work.
The knife I'll be giving away will be made of 1/8" 1095 and has been diffirentially heat treated by me with a clay coated spine. The blade length is approximately 2" and an overall length of approximately 5.5" with a hollow chisel grind. The handle slabs will be made of tan G-10 with black fiber liners and stainless thong tube. If I can find the right pin material size tomorrow, it will be carbon fiber. The knife will have a kydex neck sheath.
Here is a photo of two of the blades. I will be giving away whichever I feel has the best fit and finish when complete. This photo was taken after I completed the initial grinding.
The knife I'll be giving away will be made of 1/8" 1095 and has been diffirentially heat treated by me with a clay coated spine. The blade length is approximately 2" and an overall length of approximately 5.5" with a hollow chisel grind. The handle slabs will be made of tan G-10 with black fiber liners and stainless thong tube. If I can find the right pin material size tomorrow, it will be carbon fiber. The knife will have a kydex neck sheath.
Here is a photo of two of the blades. I will be giving away whichever I feel has the best fit and finish when complete. This photo was taken after I completed the initial grinding.