JTClark
Well-Known Member
I wanted to see if I could made an integral frame lock and this is what I came up with.
The frame is 1/8 titanium heat anodized, the locking side has an orange peel finish, the non-locking side has a Cocobolo scale with a polished finish. The blade is 14-4-CrMo.
Comments are welcome
Jason
The frame is 1/8 titanium heat anodized, the locking side has an orange peel finish, the non-locking side has a Cocobolo scale with a polished finish. The blade is 14-4-CrMo.
Comments are welcome
Jason