Here is my latest project. It's been far too cold to beat on my poor frozen anvil so here is a stock removal blade. As always input is welcome and thanks for looking.
Stock Removal
1075 differentially heat treated
7 1/2 OAL blade 3 1/4 X 1 1/4
Tapered tang (although could/should have been tapered a bit more)
Redwood Burl scales with red liners
Stainless pins
3.8 oz.
Stock Removal
1075 differentially heat treated
7 1/2 OAL blade 3 1/4 X 1 1/4
Tapered tang (although could/should have been tapered a bit more)
Redwood Burl scales with red liners
Stainless pins
3.8 oz.