Bühlmann
Well-Known Member
My first KITH & I didn't need the added stress of a WIP
, so here is KenH's finished new Ko-Bunka:
-26C3 HC steel @ 63 HRC (+/-2)
-Forced patina on flats, 15 dps edge
-Tapered wa handle construction
-African blackwood, ”abyss” Kirinite bolsters, white G10 & aluminum spacers
-custom cedar saya w/matching Kirinite pin
-4.875” cutting edge, 4.75” handle, 10” OAL, 4.2oz (5.4oz w/saya)
-26C3 HC steel @ 63 HRC (+/-2)
-Forced patina on flats, 15 dps edge
-Tapered wa handle construction
-African blackwood, ”abyss” Kirinite bolsters, white G10 & aluminum spacers
-custom cedar saya w/matching Kirinite pin
-4.875” cutting edge, 4.75” handle, 10” OAL, 4.2oz (5.4oz w/saya)
Last edited: