Calvin Robinson
Moderator Christian Forum
This is my Little Bill model slipjoint.
The hollow ground,2 5/16" x3/32" blade is Sandvik 14C28N stainless steel @ 59 Rc with a 400 grit hand rubbed finish. It pivots on my shop made 3/16" stainless steel bushing and has a 1/2 stop position.
The knife is 3 1/2" long closed and weighs in at a whopping 1.8 oz.
The integral bolster/liners are 416 stainless steel as are the handle pins.
The scales are amber,stag jigged bone.
Questions,comments and constructive criticsism are welcome.
Y'all enjoy!
The hollow ground,2 5/16" x3/32" blade is Sandvik 14C28N stainless steel @ 59 Rc with a 400 grit hand rubbed finish. It pivots on my shop made 3/16" stainless steel bushing and has a 1/2 stop position.
The knife is 3 1/2" long closed and weighs in at a whopping 1.8 oz.
The integral bolster/liners are 416 stainless steel as are the handle pins.
The scales are amber,stag jigged bone.
Questions,comments and constructive criticsism are welcome.
Y'all enjoy!
