Calvin Robinson
Moderator Christian Forum
This is a locking liner knife with a nail nick for opening instead of a thumb stud.
The blade is Sandvik 13C26 stainless steel @60Rc,2.5" x .075", with a 400 grit hand rubbed finish.
The knife is 3 11/16" closed and thin at 5/16" and weighs 1.75 oz.
The .050" titanium liners are jeweled on the inside.
The 410 stainless bolsters are only .060" at the thickest part and .030" at the edges,with a 400 grit hand rubbed finish.
The scales are amber jigged bone,laminated onto black G-10 and I left them about .020" proud of the dovetailed bolsters.
Comments,questions and constructive criticsism are welcome.
Y'all enjoy!
The blade is Sandvik 13C26 stainless steel @60Rc,2.5" x .075", with a 400 grit hand rubbed finish.
The knife is 3 11/16" closed and thin at 5/16" and weighs 1.75 oz.
The .050" titanium liners are jeweled on the inside.
The 410 stainless bolsters are only .060" at the thickest part and .030" at the edges,with a 400 grit hand rubbed finish.
The scales are amber jigged bone,laminated onto black G-10 and I left them about .020" proud of the dovetailed bolsters.
Comments,questions and constructive criticsism are welcome.
Y'all enjoy!