Hello all,
I will be starting a new shop on my property in Floyd, VA. I have two possible locations... a shed near the house (10x20 with power) and a barn a bit further way (16x16 2 story without power - but can be run). I'll ask, but I'm assuming I'm better off just starting in the shed and then if I need to run power and move into more space I can. I basically just wanted to go over some gear though.
I've done a ton of research and tried to fit everything I could into my budget range for this startup. I have a lot of the basic hand tools around the house, but I've been looking at low end machinery. I'll list some items and hopefully you all have some input.
Grizzly H8192 - 1x42 w/ 8 in Disc
https://www.walmart.com/ip/Grizzly-...0125&wl11=online&wl12=191456367&wl13=&veh=sem
Klutch Horizontal/Vertical Metal Cutting Bandsaw - 4.5x6
http://www.northerntool.com/shop/tools/product_200659143_200659143
Ironton 8 in Benchmount Drill Press
http://www.northerntool.com/shop/tools/product_200659137_200659137
Now, I get it... spend more get more. I am just hoping to stay within my budget and optimize time. Once I reach the point of selling, profits will go toward a 2x72 NWG or something similar. I already have the angle grinder, bench grinder, hacksaw, files, etc.
Thanks for your input!
I will be starting a new shop on my property in Floyd, VA. I have two possible locations... a shed near the house (10x20 with power) and a barn a bit further way (16x16 2 story without power - but can be run). I'll ask, but I'm assuming I'm better off just starting in the shed and then if I need to run power and move into more space I can. I basically just wanted to go over some gear though.
I've done a ton of research and tried to fit everything I could into my budget range for this startup. I have a lot of the basic hand tools around the house, but I've been looking at low end machinery. I'll list some items and hopefully you all have some input.
Grizzly H8192 - 1x42 w/ 8 in Disc
https://www.walmart.com/ip/Grizzly-...0125&wl11=online&wl12=191456367&wl13=&veh=sem
Klutch Horizontal/Vertical Metal Cutting Bandsaw - 4.5x6
http://www.northerntool.com/shop/tools/product_200659143_200659143
Ironton 8 in Benchmount Drill Press
http://www.northerntool.com/shop/tools/product_200659137_200659137
Now, I get it... spend more get more. I am just hoping to stay within my budget and optimize time. Once I reach the point of selling, profits will go toward a 2x72 NWG or something similar. I already have the angle grinder, bench grinder, hacksaw, files, etc.
Thanks for your input!