The bigger knife is for the belt...I am thinking in the line of a kukri that is in the 12" or so blade...shot and to the point. i have a cold steel machete kukri handle here I can use and some stainless tube for the pin.
I wanted the handle to stick out only. It works as it is inline with your...
I had this black Izula knife in a trade for part cash and I decided to take it out of the plastic and mess with it. I had a small pouch that needed something and decided that ants would be just the thing. I stripped the blade and glass beaded it to a nice matte finish then shot it with OD Green...
Short sword of 1/4" Crucible Forge V carbon steel.
Specs:
13 1/2" blade- 21 1/4" overall
2" at widest point
Deep blued finish
Ghost G10 handles
Stainless tube pins
Gray Kydex speed sheath with primary and secondary retention.
Blue GITD dots on handle slabs (all adhesive is also blus GITD)
2...
I pulled out the old bucket and finished one of these in a long line from the past. I bought from surplus in 1996 several car door sized sections of carbon fiber from a 767 wing panel section for 50 cents a pound. I used it for various projects in 2005 through 2008 and then dropped the water...
Title modified by Bossdog
(Mods- move it if you need to)
I would like to take a moment to complain to no one in particular about the person or persons who broke into my son's storage unit off base in Ft Lewis, Washington, a couple months ago.
You are a piece of dung. While an Army Combat...
Steels need to quench differently with different mediums... I use water almost all the time now but certain steels can't be just dumped into the bucket. They may have to be dipped a couple times to slow the quench time down.
I got some of this ..enough to make all 13 ti blades. This is the 'mirage' which is a transparent kydex like material that so far is very interesting. It works like Concealex or good Kydex and comes covered with a film on both sides as I am sure scratches bite when you can see through the...
Pocket EDC carry for entry tools kit mostly (yes, I have one). They are very light and surprisingly strong.
Ever break off the tip of your knife doing something you really shouldn't have? This is what it is for.
Made another small quantity of these again. 0.125"x0.75"x4.0" AL6V4 ti in sand blast and sandblast/color treated. These happen to be flat as per request by customer for pocket kits.
By goatherder62 at 2012-08-23
A little red g 10 handled knife for some customers. Chisel ground 1/4" thick 1095 with 3" polished blade (when finished), stainless tube pins and black kydex belt sheath.
Uploaded with ImageShack.us
It is Black Delryn. It has that pearl looking pattern in it...all the colors of delryn are that way. I have a quantity of bright green and a gray as well as the black in my shop[ and they all look like that.
1/4" thick flat ground tanto-ish 6" blade of N690 Cobalt stainless with a glass bead finish, polished haz mat symbol, and hidden tang ghost jade G10 handle. Stainless tube pins. 11 1/2" overall length. Gray digi cam kydex. All of the assembly epoxy has some cerulean blue glo powder in it...more...