Motors, VFDs, Forge Supplies, etc.

Wayne Coe

Forum Owner - Moderator
MOTORS, VFDs , FORGE SUPPLIES and other items FOR SALE BY WAYNE COE
Motors:

56C FOOTED WITH C-FACE








Prices include shipping in the Lower 48 United States (CONUS) unless otherwise stated.
Other locations will have additional shipping. All shipments are FOB the shipper. Motors and VFDs are shipped from the companies' warehouses.

Retail not including shipping My Price including shipping CONUS
1.5 hp single phase TEFC 1800 rpm $315.00 $225.00
2 hp single phase TEFC 1800 rpm 375.00 258.50
1.5 hp three phase TEFC 1800 rpm 304.00 225.00
2 hp three phase TEFC 1800 rpm 341.00 248.50
1.5 hp single phase TEFC 3600 rpm 290.00 225.00
2 hp single phase TEFC 3600 rpm 330.00 255.20
1 hp three phase TEFC 1800 rpm 228.00 217.00

Molded cords with cable glands and toggle switch pre-wired for 1.5 hp single phase motors wired for 110v: $45.00 including shipping CONUS.
Molded cords with cable glands and toggle switch pre-wired for 2 hp single phase motors wired for 110v: $75.00 including shipping CONUS.
Off/on toggle switches $15.00 including shipping CONUS.
Strain relief water proof cable glands $2.00 each plus shipping
14 gage Molded 8’ cords for 115v applications $15.00 including shipping CONUS
14 gage Molded 8’ cords for 230v applications $35.00 including shipping CONUS
Wiring kit for 115v VFD includes 8' 14 gage molded cord, 2' 4 conductor wire for from VFD to motor, cable glands, wire nuts and grounding conectors $45.00 including shipping CONUS.
Wiring kit for 230v VFD includes 8' 14 gage molded cord, 2' 4 conductor wire for from VFD to motor, cable glands, wire nuts and grounding conectors $60.00 including shipping CONUS.
Mounting bracket for VFD $40.00 including shipping CONUS.
Other motors are available. Call, PM, or e-mail for price quotes or if you have questions.

VFDs

KBAC 27D
Retail Price: $442.00 Plus Shipping
My Price: $448.00 With Free Shipping


KBAC 24D
Retail Price $352.00 Retail Price: $352.00 Without the reversing switch
My Price: $350.00 With the reversing switch and free shipping

I
am distributing two models of VFDs.
The KBAC 27D is for 1.5 or 2 hp motors. The KBAC 24D is for 1 hp and less and includes the reversing switch. These are NEMA 4X (washdown, dust proof) enclosed VFDs. These are very simple systems to set up, no programming, I had only 3 jumpers to change on the KBAC 27D. I have a hard time believing how easy this new design, direct drive grinder was to build and then to set up the VFD.
The price of the KBAC 27D VFD is $448.00 including shipping CONUS.
The price of the KBAC 24D VFD is $350.00 with the reversing switch including shipping CONUS.

BELT GRINDERS:

The cost to attend a “Build a Belt Grinder” workshop with 10 to 15 participants:
For an Adjustable Speed (with 4 step pulleys) with 1.5 hp motor: $ 900.00
For an Adjustable Speed (with 4 step pulleys) with 2 hp motor: $1,000.00
For a Variable Speed (with a VFD) with 1.5 hp motor: $1,350.00
For a Variable Speed (with a VFD) with 2 hp motor: $1,450.00

Any of these grinders are available built out and ready to run including shipping CONUS
For an Adjustable Speed (with 4 step pulleys) with 1.5 hp motor: $1,350.00
For an Adjustable Speed (with 4 step pulleys) with 2 hp motor: $1,450.00
For an Variable Speed (with a VFD) with 1.5 hp motor: $1,750.00
For an Variable Speed (with a VFD) with 2 hp motor: $1,850.00

DISK GRINDERS:

I am also offering motors and VFDs for use with disk grinders such as the disks offered by USA Knifemaker (http://www.usaknifemaker.com/grinders-sanders-all-kinds-grinder-parts-contact-wheels-c-99_60.html) or Rod Nielsen’s disk system (www.nielsindesigndiskcgrinder.com). Because of the various configurations for the system you will need to contact Tracy or Rod for pricing and to make your purchase of the disks.

I am also offering Disk Grinders with Rod Nielsen’s disk system. These Disk Grinders will have a 1 hp 3 phase motor and a KBAC 24D VFD with forward and reverse. See my post Do you need a Disk Grinder? for more information. See http://www.nielsendesigndiscgrinder.com/Welcome.html. Because of the various configurations for the system you will have to contact Rod or myself for pricing.

FORGE SUPPLIES:

I also have gas forge supplies:
Inswool insulating blanket 24" wide, $ 8.00 per running foot plus shipping
2600 degree castable refractory, $12.00 per 6# bag plus shipping
Kast-0-Lite 3000 degree castable refractory, $15.00 6 # bag plus shipping
Plistix IR reflective. (similar to ITC 100 but much cheaper) $ 10.00 per pint plus shipping
Ceramic standoffs for use in forges or HT ovens. $ 2.00 each plus shipping
Soft Fire Brick $ 3.00 each plus shipping

Check with me for shipping on items that do not specifically have shipping included. Prices are subject to change without notice.
 
Last edited:
C

courtatlawjudge

Guest
Wayne,
Thanks for all the help this morning. I look forward to receiving my goodies.
Lee
 
Top