g10 and steel for trade

Justin King

Well-Known Member
I have quite a bit of g10 in various thicknesses and colors, as well as some blade steels for trade. I would like to trade for some 410 stainless liner material, bar stock and pin stock for folders, and any good books on folder making. I would also be interested in some wrought iron, but will consider other materials and tools, can't hurt to make me an offer.
Most of the g10 was sourced from Midwest or AKS, a few pieces from Sheffield. Most are partial sheets, a few pairs of scales, and thicknesses run from thin liner material up, with quite a bit in the 1/8" plus or minus range, suitible for folders, or laminating together for color combinations. It will take a while to come up with a complete list, I'll make a package deal for anyone who saves me the trouble.
Steels I have are:
Cpm154 .130" thick , 1.5" wide and 17-1/2" long, precision ground
1095 .250" thick, 1.25" wide and and 36" long
5160 .250" thick, 1.5" wide and 32" long
A2 .270" thick, 2" wide and 14.875" long, precision ground
O1 .500 thick , 3/4" wide and 29" long, precision ground

Feel free to PM me with any offers
 

Justin King

Well-Known Member
Here's a pic of the g10. Everything on the left is .250 or thicker, middle is .120-.150 and on the right is .100 or less, liner or laminating thickness. Some pieces are full 8.5x11.5 as shipped from AKS, the smallest partials will yield at least 1 pair of standard scales.


IMG_20150117_115633757.jpg
 
Last edited:

Justin King

Well-Known Member
The g10 and cpm154 are gone but the rest of the steel is still available, I would trade for some 416 bar and pin stock
 
Top