CruforgeV, 1.2442 (115W8), and 1.2519 (110WCrV5)

Otto

Member
Greetings from northern Idaho. I'm a hobbyist knife maker and my attention has recently shifted from high carbon steel to PM and stainless and I thought this might be the place to redistribute my stock pile of CruForge V, 1.2519 (110WCrV5) and 1.2442 (115W8) as follows:

Cruforge V Flat Stock:
1) 1.25 x .25 x 48", 3 each
2) 1.25 x .25 x 42", 5 each
3) 1.25 x .25 x 23.5", 14 each
4) 1.25 x .25 x 11.5". 5 each
5) 2 x .25 x 48", 3 each
6) 2 x .25 x 42", 1 each
7) 2 x .25 x 29", 1 each

CFV_flat1.25.JPG

CFV2inch.JPG

CruForge V Round Stock:

1) 1.25" x 48", 8 each
2) 1.25 x 22", 4 each



CFV_round1.JPG


1.2519 (110WCrV5) Flat Stock:

1) 40mm x 5mm x 625mm, 10 each
2) 50mm x 5mm x 625mm, 3 each
1.2519.JPG

1.2442 (115W8) Flat Stock:

1) 40mm x 3.3mm x 650mm, 12 each
2) 50mm x 3.3mm x 650mm, 3 each
3) 50mm x 4mm x 650mm, 3 each

1.2442a.JPG


I'd like $2,000 for the whole lot and am willing to deliver within 500 miles or so. Thanks,

Otto
 

Otto

Member
Greetings from northern Idaho. I'm a hobbyist knife maker and my attention has recently shifted from high carbon steel to PM and stainless and I thought this might be the place to redistribute my stock pile of CruForge V, 1.2519 (110WCrV5) and 1.2442 (115W8) as follows:

Cruforge V Flat Stock:
1) 1.25 x .25 x 48", 3 each
2) 1.25 x .25 x 42", 5 each
3) 1.25 x .25 x 23.5", 14 each
4) 1.25 x .25 x 11.5". 5 each
5) 2 x .25 x 48", 3 each
6) 2 x .25 x 42", 1 each
7) 2 x .25 x 29", 1 each

View attachment 79113

View attachment 79114

CruForge V Round Stock:

1) 1.25" x 48", 8 each
2) 1.25 x 22", 4 each



View attachment 79117


1.2519 (110WCrV5) Flat Stock:

1) 40mm x 5mm x 625mm, 10 each
2) 50mm x 5mm x 625mm, 3 each
View attachment 79118

1.2442 (115W8) Flat Stock:

1) 40mm x 3.3mm x 650mm, 12 each
2) 50mm x 3.3mm x 650mm, 3 each
3) 50mm x 4mm x 650mm, 3 each

View attachment 79119


I'd like $2,000 for the whole lot and am willing to deliver within 500 miles or so. Thanks,

Otto
I'm dropping the price to $1,700. Thanks,

Otto
 

Otto

Member
I paid roughly $80 a piece for the eight 4' long 1.25" bars of Cruforgev and $35 each for the four 22" long bars, several years ago. That's what I'd take individually, or $700 for all of the round bars together if the buyer pays the shipping or picks them up. Thanks,

Otto
 

Otto

Member
My initial quote with UPS standard ground was $316 for the eight, 4' bars in two separate tubes. Then I tried again using their flat rate ground service and with all of the bars in three separate packages was quoted $96.
 
Top