BEGG WIP FIXED BLADE

T

Tanya Begg

Guest
Todd is participating in a buildoff knife on another forum, but I like to spread the joy so posting here for those of you that make this your home!! If this is not the right place for this thread please move it! thanks. hope you enjoy.

I will be including short videos as well as still shots, to better capture the essence of this wip and bring you,the collector into our shop and allow you an intimate viewing of Todd's Angelic hands at work.

He is starting out with a 10lb plate of D-2 steel. He had it labeled as 5lbs but I weighed it on my shipping scale and it was slightly over ten.

[ame="http://www.youtube.com/watch?v=m-qfOtnr4zY"]YouTube- 2010 fixed blade buildoff WIP[/ame]
[ame="http://www.youtube.com/watch?v=7ST_k0WGaug"]YouTube- 2010 fixed blade buildoff WIP-glue down D-2[/ame]
[ame="http://www.youtube.com/watch?v=Whr24V1L0ks"]YouTube- WIP-D-2 on the mill.[/ame]
[nomedia="http://www.youtube.com/watch?v=A3m9fJQSago"]YouTube- milling out the D guard[/nomedia]

[ame="http://www.youtube.com/watch?v=1lDLM00uwlQ"]YouTube- Milling out the profile[/ame]

[ame="http://www.youtube.com/watch?v=q8M9xxyUI6o"]YouTube- more profile milling[/ame]

[ame="http://www.youtube.com/watch?v=CMvdCpX-V8E"]YouTube- and still profiling[/ame]

[ame="http://www.youtube.com/watch?v=GbNDA6nZ2XA"]YouTube- dinner and saw teeth.[/ame]

[ame="http://www.youtube.com/watch?v=fxxRXBYr5yk"]YouTube- profile finaly roughed out[/ame]









 
Last edited by a moderator:
T

Tanya Begg

Guest
[ame="http://www.youtube.com/watch?v=oIDuRZPlihw"]YouTube- Milling down the blade thickness[/ame]
 
T

Tanya Begg

Guest












[ame="http://www.youtube.com/watch?v=ORMe7lC44Go"]YouTube- milling out the inlay pockets in blade[/ame]
 
T

Tanya Begg

Guest






[ame="http://www.youtube.com/watch?v=X9oladQn_zg"]YouTube- milling the rings around the pocket inlays[/ame]

When he said 18hrs of milling, I guess he wasn't kidding. We are still on side one of this knife....the other side should go quicker.....I hope.
 
T

Tanya Begg

Guest










[nomedia="http://www.youtube.com/watch?v=s14L_3BsIPc"]YouTube- prepping for the next step.[/nomedia]
 
T

Tanya Begg

Guest
My baby girl was being very patient in the shop, so I had to take her picture.









[ame="http://www.youtube.com/watch?v=oCItIYbg4Jo"]YouTube- milling a flute in the blade[/ame]
 
T

Tanya Begg

Guest
[ame="http://www.youtube.com/watch?v=ekDK8MSAYCA"]YouTube- Fear no Evil[/ame]



 
T

Tanya Begg

Guest
[ame="http://www.youtube.com/watch?v=m4HdWzaQPWU"]YouTube- deburring/area beautification[/ame]
 
T

Tanya Begg

Guest
I am having technical difficulties out the wazoo...so some of the pics and vids are probably out of order, but you guys are smart fellers, so I am sure you can figure out whats what!
I am doing good just to get them uploaded today!! these are from last night.


[nomedia="http://www.youtube.com/watch?v=TQyxOlcBaY8"]YouTube- right angle attachment[/nomedia]
[ame="http://www.youtube.com/watch?v=WbD4CCYm6LE"]YouTube- bevels on knuckle spikes[/ame]
 
T

Tanya Begg

Guest
Finally got this sucker into heat treat this morning...I thought he had forgotten he had to do this step.....
 

Curtiss Knives

KD Founding Member #1, Knifemaker
Tonya, why didn't you make Todd use the "Automatic..Supermatic..Instomatic Knifemaking Machine" ? That way he would still be able to fit that finger in his nose kewlpics1
 
Top