Search results

  1. USNGMG2

    One more traditional back sewn puukko sheath

    One more new traditional back sewn puukko sheath I made a week ago for a three year old Puronvarsi project . Black buffalo leather, wooden lasta and dangler secured by a brass ring and Chicago screw post.
  2. USNGMG2

    New traditional back sewn puukko sheath

    Just completed this traditional back sewn puukko sheath for my Puronvarsi project from two years ago. Sheath is made from 2mm black buffalo leather. The wooden insert was carved from poplar and coated inside and out with two coats of urethane. The sheath was hand stitched and the dangler secured...
  3. USNGMG2

    Simple 80mm EDC puukko and sheath

    Just completed this 80mm bird head EDC puukko and sheath. Blade: Lauri 80mm tool marks removed, polished to 800x and satin finished. Handle: English walnut, deer antler bolster with red fiber spacer and Danish oil finish rubbed out to 1000x. Sheath: Brown buffalo leather, plastic insert for...
  4. USNGMG2

    Newest puukko projects

    Sami inspired puukko, 117mm blade, black ash burl handle with deer antler bolster and caribou bone endcap. The sheath is black buffalo leather with dangler secured by brass D ring. Bird head puukko, 100mm drop point blade, padauk handle with deer antler bolster and black fiber spacer...
  5. USNGMG2

    To All Puukko Enthusiasts

  6. USNGMG2

    Two more puukkos

  7. USNGMG2

    More puukkos

  8. USNGMG2

    More Puukko Work

  9. USNGMG2

    Kokemäen puukko

    My take on the Kokemäen puukko 93mm reground and polished Lauri carver, Australian golden mallee handle. Sheath is handmade bison leather with dangler. r
  10. USNGMG2

    Non traditional puukko sheath

    Time for a non traditional sheath for a puukko I made last year.
  11. USNGMG2

    Three Spring 2020 puukkos get sheaths

    I made these traditional puukko sheaths using 2mm smooth cowhide. Simple straight lines were used as surface treatment.
  12. USNGMG2

    Puronvarsi Hunter

    Finally completed the Puronvarsi 100mm Hunter. Blade was hand polished to 800x then gray Scotch-Brite satin finish, belly slightly modified, the profile and the spine reground to straight and beveled. The peened .187" brass bolster was fitted to the blade and epoxied into the Gidgee handle with...
  13. USNGMG2

    Latest two Puukkot

    Latest puukkot #1. Puronvarsi 125mm blade shortened to 115mm x 23mm. Brut de forge removed, belly modified. Cocobolo handle, black fiber spacers, nickel silver bolsters. #2. 115 mm blade, beveled, curved spine, slight drop point. Black ash burl handle with brass bolsters and contrasting ebony.
  14. USNGMG2

    Spring 2020 puukko group photo.

    Group photo of puukko production Spring 2020 April & May 2020.
  15. USNGMG2

    My latest Puronvarsi projects

    My latest Puronvarsi projects 1. 110mm blade, brass bolsters, padauk and ebony handle. 2. 120mm blade, nickel/silver bolster, padauk and ebony handle. 3. 120mm blade, nickel/silver bolster, goncalo alves handle with padauk and ebony spacers.
  16. USNGMG2

    Cocobolo Puukko

    I completed my newest puukko: Blade is 100 mm x 20mm, peened nickel silver front bolster and polished rear end cap with cocobolo and ebony handle with boiled linseed oil finish. The blade has a 2mm bevel on each side of the 2mm spine. The blade was polished to 800x then gray Scotch Brite finish.
  17. USNGMG2

    Some new puukko work

    Some new puukko work and a new Nordic blade.
  18. USNGMG2

    Black ash burl puukko

    I decided to complete this puukko yesterday. Blade is 103mm x 24mm x3.5mm with a 600 grit satin and Scotch Brite finish. This blade was an early attempt prior to getting a vfd and new motor. It is not a rhomboid grind. The handle is black ash burl with ebony, padauk and redheart accents as...
  19. USNGMG2

    10/24/19 puukko

    I had forgotten about six Puronvarsi blades I put away. I decided to make a puukko using a 120mm blade shortened to 110mm and satin finished. The handle is padauk with ebony and redheart accents. Bolsters were made from .188" brass.
Back
Top