Search results

Cool. Thanks for the info. I’ve ordered from him as well, but that was before he became famous, lol. I never even tried ordering off his website since I have to sort through purchasing logistics with our company. That’s why I wanted to talk direct with him. I will try that email you shared &...

Anybody been in contact with Travis Wuertz lately? I got it approved to buy his grinder and surface grinder attachment here in our machine shop at work, but I can’t get in touch with anyone via phone, messenger or any other way. Just curious!

I was wondering if it was left somewhere with a lot of heat. He grabbed it out of the back of his car. He might keep it there for show & tell. I think it is a show piece for him. He probably doesn't use best practices with some of his stuff??? Good possibility. I'll have to ask him next time.

I didn't see any sign of material coming loose of tang. I used Corby bolts, kirirnte roughed on fresh 60 grit belt & tang sand blasted. Nothing done different than any other knife. What I saw looked more like weird shrinkage!

I didn't see any sign of material coming loose of tang. I used Corby bolts, kirirnte roughed on fresh 60 grit belt & tang sand blasted. Nothing done different than any other knife. What I saw looked more like bad shrnk

I've made 4 or 5 knives using Kirinite and had a disbelief moment yesterday. I met up with a customer/friend that bought a knife from me & we handled it with Kirinite. He was showing it off & the handle material caught my attention real quick! This knife is only about 8 months old & there was...

Clint's method is exactly what I do on Damasteel. The only thing I do is give a very light buff after each etch to take the dullness away, then clean with alcohol and a paper towel. Make sure the blade is clean before going back into acid.

It is typically stabilized wood. This usually happens when doing lighter woods. How do you avoid the wood when buffing the tang/pins/lanyard tube?

An tips on how to buff certain woods without leaving a black residue embedded in it?

These are definitely rings of solid steel, about 1/4" in diameter. So I did an experiment tonight with a piece of a ring. I ground two sides flat & tested on the Rockwell tester and got about 42-43Rc. I then heat treated a piece @ 1500 for ten minutes and quenched in an 11 sec oil. Rockwell...

It should be some sort of high carbon stuff. It is used in pre-stressed 66" concrete water pipe made in the 1960's. when you cut these bands in the concrete, it blows apart. When we've been cutting them with the angle grinder, they put off showering sparks. I'm assuming they are at a spring...

Hi, I am new to the forging part of knife making, but I have a source for some carbon steel (round) bands out of concrete pipe. Is there a way to get pieces of these 'bands' and forge them together? They are about 1/4" to 5/16" in diameter. I have some experience making pattern welded steel, so...

I have been trying to decide on a grinder for the last couple years, debating between a Bader, KMG or TW-90. I thought I had it narrowed down to a Bader or KMG, but took the plunge on the TW-90. Travis is a great guy to talk with (sometimes a little hard to get in touch with, probably because he...

When I first built my NWG, I had issues with bad wobble. I think most of it was in the shaft I was using (home fab'd), but I went ahead and welded a 2"x4" rect tube extension outwards to mount the second pillow block. It seemed much sturdier. Since then, I have bought two shafts from Beaumont...

Thanks for your comment. Overall, were/are you happy with the KMG?

I am getting close to pulling the trigger on my first 'factory' grinder & am highly considering a KMG, due to the price. I have not seen one in person, so I am just going off Rob's website and have concerns about the work rest. I use a rest quite often and don't see much versatility on the KMG's...

I see what you are saying about the wheels, but when the tires cost half as much as the car, it is something to consider!

I guess I haven't checked, but does the tw90 take Bader style wheels?

I have been looking at buying a grinder this year and have it narrowed down to the KMG & the TW90. The KMG is definitely easier on the pocketbook, but I have four Bader contact wheels and I guess Rob doesn't make the adapter anymore to fit them to his machine. Does anyone know who might still...

I really don't know with that kind of rope. With the 1/2" rope I use, I can usually obtain at least 200 cuts. I could probably get more, but it gets monotonous and wears a blister. Like I said, I use it for another assurance test & after you know what your HT should be, it's another way of...