Search results

  1. S

    3 axis milling table? - where can I find one?

    Get two 2 axis tables and mount the second to a vertical -Page
  2. S

    Can a Metal Lathe be used for wood?

    can it ? yes if you are willing to make appropriate tooling. is it a good idea? no. I have done it in a pinch, I have 35 years of woodturning behind me and was able to make cutters with proper geometry, and a toolrest for freehand work that attaches to the compound of one of my South Bends. It...
  3. S

    Some newbie observations, and a question.

    Proper oil is an investment that seems steep until you amortize it over the lifetime of the oil by the number of blades you can use that oil for if you take care of the oil. I resisted spending that money for a long time, after all I was getting knives that held an edge well and didn't break...
  4. S

    Ashokan 2012

    it is up http://www.ashokanknifeseminar.com/ -Page
  5. S

    Annealing

    Kevin, as a professional photographer I am happy to see that you are watermarking your images, please do not apologize or feel guilty about that. It is your work and it makes just as much sense as stamping your blades. -Page
  6. S

    Annealing

    I believe that annealing and spheroidizing are an important tool in the information and practices toolbox of anyone interested in working with blade and tool steels. This is a great starting point. -Page
  7. S

    1gallon of Parks 50

    I resisted buying Parks for a long time. That was foolish. The difference was noticeable the first Parks 50 blade I sharpened. 5 gallons is really the right amount to absorb the heat energy of a reasonable sized blade. If you need to justify the expense to your wife find something like takeout...
  8. S

    Belt breaks - slaps face

    I wear a full face PAPR respirator (Trend Airshield Pro) after a piece of steel dust made it around my safety glasses into my eye, it stopped a broken belt from getting to my face at one point -Page
  9. S

    Is Parks 50 too fast for 1080/1085 steel

    I have been using Parks 50 on 1084, 1095, 15N20, and 5160 with great results. Any time I have observed people having issues it has been found when we went through their methodology that they were way off on their heating/soaking procedures -Page
  10. S

    D'oh!!!

    Diamond abrasive drill bits or burrs with lots of oil and very gentle pressure will get you through without issue -Page
  11. S

    I'm SURE someone has needed this before...

    there is a jewelers product called attack which is a solvent designed specifically for eating epoxy http://www.amazon.com/Grobet-Attack-Glue-Dissolving-Compound/dp/B00065CKIO -Page
  12. S

    Brass fittings

    I have found bronze to work better, especially manganese bronze. The only way to keep brass from tarnishing is to heavily gold plate it or polish and wax it regularly -Page
Top