Search results

  1. Johnny Roberts

    Desert Ironwood with Vine File Work

    Haven't posted in this section in quite a while. Slipjoints have been taking up a lot of my time. But I Finished this one up recently and thought I would share. ATS-34 heat treated by me to a 59 RC. Over 12 inches long with 11 inches of vine work on the spine. The sheath is made by me...
  2. Johnny Roberts

    Black Widow Jack Knife

    Designed as durable EDC, this one is a basic design that fits very well in the pocket. ATS-34 blade and spring with stainless liners and bolsters. It is very slim and fits comfortably in the hand. Dovetail bolsters on each end show up nicely with bright red liners. 49 RC on the...
  3. Johnny Roberts

    Teardrop Wharncliffe

    This green and black slip joint is a new pattern that I have been tinkering with. It is a slim comfortable slipjoint that will fit well in the pocket. 59Rc on the blade and 47-48 on the spring. Satin finish on the bolsters and blade. The blade is a wharncliffe design and is a really good...
  4. Johnny Roberts

    Barbwire Swayback Jack

    This Swayback Shadow Pattern has ATS-34 blade (RC 59) and spring (RC 49) with stainless steel liners and pins. T he Barbwire Micarta has a nice basket weave pattern and all the steel has a smooth satin finish. The pull is a nice solid 6 out of 10 and the spring is flush at all 3 stops. It is...
  5. Johnny Roberts

    Margarita Swayback Jack

    ATS-34 blade (RC 59) and spring (RC 49) with stainless steel liners and pins. Beveled bolsters are satin finished. The light green (margarita) colored scales rest on white liners. It has a pull of about 6 out of 10 and is flush at all 3 stops. The Wharncliffe blade has turned out to be a...
  6. Johnny Roberts

    Carbon Fiber Swayback Jack

    This is the last swayback in a series of three that I heat treated at the same time. It is also my first knife to be done with carbon fiber. I really like the look of the pattern that showed when the knife was completed. It has nice grip and solid walk and talk. Of course, the ATS-34 blade...
  7. Johnny Roberts

    Ultimate Bravo 1 and Accessories

    $320 Price Drop I was given a really nice Bark River Bravo 1 package about 2 years ago from someone who knew I loved knives. It has sat in my safe the entire time and needs to go to a good home. I am including some pics. Please send me an email if you have any questions. Cash only. No trades...
  8. Johnny Roberts

    Carbon Fiber Swayback

    This is the last swayback in a series of three that I heat treated at the same time. It is also my first knife to be done with carbon fiber. I really like the look of the pattern that showed when the knife was completed. It has nice grip and solid walk and talk. The ATS-34 blade (RC 59) and...
  9. Johnny Roberts

    Margarita Swayback Wharncliffe

    Very similar to the brown basketweave Swayback I posted here earlier. ATS-34 blade (RC 59) and spring (RC 49) with stainless steel liners and pins. The light green (margarita) colored scales rest on white liners. I picked this green micarta up from Tracey at usaknifemaker.com. I really like...
  10. Johnny Roberts

    Swayback Shadow

    This Swayback Shadow Pattern has ATS-34 blade (RC 59) and spring (RC 49) with stainless steel liners and pins. The Barbwire Micarta has a nice basket weave pattern and all the steel has a smooth satin finish. The pull is a nice solid 6 out of 10 and the spring is flush at all 3 stops...
  11. Johnny Roberts

    Shadow Pattern with File Work

    Finished this shadow pattern up last weekend. This one was for someone special so I added a bit of vine file work. I am doing my file work a bit differently now after watching Dwayne Dushane at a Hammer-In. Great walk and talk with a pull of about 6 out of 10. Black G10 with stainless...
  12. Johnny Roberts

    Green / Black Wharncliffe Slip Joint

    I finished this one up last night and it turned out to be a pretty good slicer. Its my first wharncliffe blade and the first of this liner design. Black and green G10 on stainless milled 410 liners and 416 bolsters. ATS-34 Blade (59 RC) and Spring (48 RC) It is 3 5/8 inches closed...
  13. Johnny Roberts

    New Slip Joint in Halloween colors.

    I just finished this one up. ATS-34 Blade (59 RC) and Spring (48 RC) Hollow ground. 3.75 closed and 6.25 open. 410 SS liners and pins. Dressed in Tiger Stripe G10 from USA Knife Maker. Milled liners. Everything finished to a satin 600 grit. Its really enjoy seeing...
  14. Johnny Roberts

    New Slipjoint EDC in Black G10

    I just finished this one up. G10 scales with stainless liners and bolsters. ATS 34 blade (59RC) and spring (48RC). Milled liners and flush at all three stops. Thanks for looking. It has got a great walk and talk and nice smooth edges to keep it comfortable in the...
  15. Johnny Roberts

    Slipjoint Micarta & Vine

    Just finished this up about a week ago. Stainless pins, bolsters, and liners. ATS-34 spring and blade. Milled liners and dove tailed bolsters. Linen Micarta with creeping vine filework that covers the spring and extends to the blade. Thanks for looking. On to the next one.
  16. Johnny Roberts

    Name Change Please

    Can you please change my forum name to Johnny Roberts? Many thanks.
  17. Johnny Roberts

    Any Spot Welders Out There?

    I am interested in spot welding some 1/8 inch stainless steel bolsters to my liners. The liners are stainless as well and .040 to .060 thick. My problem is that I only have 110 in my shop and I don't see any 110 Spot Welders that will do more than 1/8 inch thickness. Does anyone have any...
  18. Johnny Roberts

    Soldering 410 SS to 416 SS?

    Fellow Dogs, I have been soldering Nickel Silver liners and bolsters together for my slipjoints. I am interested in using Stainless Steel for these parts. My local metal supply has 410 Stainless in sheetstock for liners but only 416 Stainless in barstock for the bolsters. Will...
  19. Johnny Roberts

    TKCA Knife Show???

    I am going to the Texas Knifemaker and Collectors Association Show in Round Rock, TX this weekend. It is a 2 day event. Here is the link for more information. TKCA Knife Show Any other Knifedogs going to be there? Lonestar JR
  20. Johnny Roberts

    Yet another heat treat process question!

    Hey guys. I searched high and low for some information on this and couldn't find anything. I got my new oven from USAKINFEMAKER.COM the other day. Pretty excited about having more control over the entire process and really lookeing forward to drawing my own springs for folders. I heat...
Top