Search results

  1. J.Leclair

    Double blade trapper

    Thanks @KenH , to answer your questions, yes the knife can be taken apart by removing the screws but I used red loctite on them all so it would take some heat to free them. Like a friction folder the pivot screw can adjust how it operates for sure. I tighten it down untill the blades start to...
  2. J.Leclair

    Double blade trapper

    Thanks everyone :-)
  3. J.Leclair

    Double blade trapper

    Double blade trapper My first multiple blade slipjoint as well as my first successful shield inlay. Twist pattern damasteel blades, Nitro-v springs. Stainless bolsters and liners with end grain mammoth ivory scales, stainless steel wing shield. Thanks for looking, please let me know what you...
  4. J.Leclair

    Mini Native

    Thanks :-)
  5. J.Leclair

    Mini Native

    Thanks, I'm very pleased with how they turned out. I actually intended to put the small one together with the screws as well but lost too many of the tiny buggers while trying to shorten them for the larger one. At least 3 went into my nasty spark catching bucket under the grinder and one or 2...
  6. J.Leclair

    Mini Native

    Mini Native slipjoint 25% smaller than the full sized Native this one is 5-3/4" long when open, with a 2.5" blade. 154cm blade and spring with stainless liners, burlap micarta scales, blue G10 bolster and a white G10 spacer. Thanks for looking, Please let me know what you think. *Available* Have...
  7. J.Leclair

    Native

    No it's not sharpened. I do it to make the point, pointier without having to grind it too thin, if that makes sense lol
  8. J.Leclair

    Native

    Native pattern slipjoint 154cm blade and spring with stainless liners, burlap micarta scales and red G10 bolsters and a white G10 spacer. 6 3/4" long open with a 3" blade thanks to Andy Fannin for sharing this pattern I really like how this one turned out. Thanks for looking, Please let me know...
  9. J.Leclair

    A new slip joint

    Looks good. I'm going to have to get myself some of that jigged bone. Makes very nice covers.
  10. J.Leclair

    Slipjoints

    Thanks guys
  11. J.Leclair

    Slipjoints

    Thanks Sean, That one is stabilized old growth redwood burl
  12. J.Leclair

    Slipjoints

    My latest build Lanny's clip made with a 154cm blade and spring and Titanium damascus scales. 6.5" overall length when open, 3-3/4" closed length 2-5/8" blade. thanks for looking, please let me know what you think. have a knife day.
  13. J.Leclair

    Slipjoints

    Hey Dogs, its been quite a while since I have posted here. Wanted to share a few of my recent slipjoint folders. Thanks for looking Please let me know what you think Have a knife day
  14. J.Leclair

    Post pics here for critique - must have thick skin

    Always trying to improve my photos. Any input appreciated StaySharp
  15. J.Leclair

    Mammoth Tsunami chef knife

    13.5" overall length with a 9" blade that stands 2" tall at the heel. Made from HHH Knives, Tsunami pattern damascus steel with Mammoth tooth handle stainless bolsters and white G10 liners. Thanks for looking StaySharp
  16. J.Leclair

    Lanny's clip slipjoint

    Yes the bolsters have 2 pins peened to the liners then the spacers and the bone are gorilla super glued to the liner. Then, there are actually 3 pins holding the whole thing together the one is the pivot pin that is through the brass bolster
  17. J.Leclair

    Lanny's clip slipjoint

    The brass bolster is dovetailed and peened to the liners the 3 spacers are also dovetailed and gorilla super glued to each other then the mammoth bone is also dovetailed and peened in place keeping everything together.
  18. J.Leclair

    My 5th slipjoint

    Thanks Johan. There is no better compliment to my mind than one of my knives being carried and used. A knives purpose is to be used not to sit in a case. StaySharp
  19. J.Leclair

    My 5th slipjoint

    Just finished my 5th slipjoint. Ladder pattern Damascus blade with 440c spring. Handles are carbon fiber with blaze orange G10 liners 7" overall when open 4" closed Thanks for looking StaySharp Www.leclairknives.ca Www.facebook.com/leclairknives
  20. J.Leclair

    Lanny's clip slipjoint

    Hey guys. Got my 4th slipjoint done today. Went with a lanny's clip pattern 6.5" overall when open and 3.75" closed. The handle is mammoth bone with black micarta and camel bone spacers and brass bolsters. Deffinately better than my last one so I'm very happy with it. Thanks for looking...
Top