Search results

  1. SBuzek

    Damasteel Trapper

    Have not posted one here in a while so i figured I'd show this one Chuck Ward shot for me at the Art of Steel show in Little Rock. This was my donation knife to Knife Rights this year. 4-1/8" Single Blade Trapper. .95 Damasteel blade and Spring with Black Jigged bone covers Thanks for looking. Stan
  2. SBuzek

    Texas Jack

    Hi everyone, I don't post here much but thought yall might like seeing this one. First Thanks to Ken Erickson for sharing this pattern and Chuck for a great shot. 3-3/4" Closed,6-3/4" w/main blade open. 3" clip point main at .098,2-1/8" pen at .068. Both blades and springs are CPM154, 416 SS...
  3. SBuzek

    Most Innovative Maker--A G Russell Show--Calvin Robinson

    Congrats Calvin on a much deserved award. Stan
  4. SBuzek

    One For Each Packpocket

    One For Each Backpocket A couple of Backpockets I just finished up.Both are about 7-3/4" OAL with a 3-1/2" blade. Both have 416 bolsters and pins w/410 liners.cresent nail knicks. Both are flush in all the positions.Mill relieved liners. One is dressed in stabilized camel bone with some file...
  5. SBuzek

    Happy Birthday..Johnny Roberts

    And may more my friend.:biggrin: Stan
  6. SBuzek

    Texas Knife Show April 2-3

    The Texas Knife Show is gonna be next weekend.April 2-3 in Round Rock,TX. If you make it stop by my table and say "Hi" http://tkca.org/?p=tks Stan
  7. SBuzek

    My First Slip Joint

    Well I finally got off my more than ample backside and made my first slip joint.A special thanks to Johnny Roberts for putting up with all my inane questions.:biggrin: Well here it is. A shadow pattern saddle horn trapper. Blade and backspring 3/32" ATS 34. .032 Stainless liners and .090 G10...
  8. SBuzek

    Blue Ti Framelock

    Put this in the gallery but though I'd put it here also. Haven't put one up in a while, so I finished this one the other day. 4-1/2" closed,3-1/4" blade,7-3/4"OAL Blade is CPM154,1/8" thick,7/8"tall at 61Rc Hollow ground w/cut swedge handle is .100 Ti jeweled and anodized blue Stainless...
  9. SBuzek

    Blue Ti Framelock

    Haven't put one up in a while, so I finished this one the other day. 4-1/2" closed,3-1/4" blade,7-3/4"OAL Blade is CPM154,1/8" thick,7/8"tall at 61Rc Hollow ground w/cut swedge handle is .100 Ti jeweled and anodized blue Stainless back spacer with simple file work inside and out. Tip up...
  10. SBuzek

    Relief cut in liner

    I'm working on a couple of large liner locks,and i am using .078 Ti for the liners and going to put 1/8"G-10 for scales. Question is do I need to cut a relief grove in the lock down to about .050 or will it be OK as is.I'm wondering if it will be too stiff.:les: Thanks Stan
  11. SBuzek

    Thumb Stud question

    On my liner locks I attach the stud with a 1-72 FH screw from the off side.I have seen some done with the blade threaded and the stud screwed into it. My question is,will a 2-56 screw be strong enough for this or even a 1-72. Thanks Stan
  12. SBuzek

    Ti Framelock EDC

    Ti Framelock EDC (SOLD) My latest off the bench,A Ti framelock EDC. .100 Ti handles w/ 1/8"ats34 blade w/cryo at 60Rc. 7-1/2" OAL,3-1/8" blade,1"wide,3/16" pivot w/bronze washers,weighs just 3-3/8 oz. BeadBlast finish,tip up lowride carry w/hidden screws,thumb grooves on spine.Blade closes...
  13. SBuzek

    Ti Framelock EDC

    My latest off the bench,A Ti framelock EDC. .100 Ti handles w/ 1/8"ats34 blade w/cryo at 60Rc. 7-1/2" OAL,3-1/8" blade,1"wide,3/16" pivot w/bronze washers,weighs just 3-3/8 oz. BeadBlast finish,tip up lowride carry w/hidden screws,thumb grooves on spine.Blade closes dead center Thanks For...
  14. SBuzek

    One Just Leaving

    Got a few quick bad pic's of this one as the customer was picking it up. 1080-15n20 480 layer random twisted damascus by me. 10-1/2"OAL w/6"blade,304 SS Hardware and Desert Ironwood, He liked it Hope yall will also. Stan
  15. SBuzek

    Question about KITH knife

    Figured I would start a new thread with this question so the answers wouldn't get lost in the shuffle. Tip up carry or tip down carry or should I drill and tap for both. Yep making a folder.:D Stan
  16. SBuzek

    Trapper Style Liner lock

    Trapper Style Liner lock (SOLD) Here is a trapper style liner lock I have for sale. 6-1/2" OAL,2-3/4" X 1/2" X .100 thick Blade CPM154 SS w/416SS dovetailed bolster,.050 Ti Liners and Mammoth Ivory scales. Thanks for looking. SOLD Price drop 200.00 Delivered in CONUS,GPal,paypal,or USMO...
  17. SBuzek

    A little Barlow

    Here is a Barlow style liner lock Cpm 154, Amboyna burl and Random pattern Damascus I made. Stan
  18. SBuzek

    Texas Knife Show

    Ok all you Texas Dogs Come on by the Texas knife Show next weekend. March 27-28 In Round Rock,TX.Come by my table and say Hi. http://texasknifeshow.com/ Stan
  19. SBuzek

    Liner Lock Barlow

    This is my third folder,The first one is in a box in pieces with too many screw ups. the second is in my pocket,good enough to carry but not good enough to show,gonna test the heck out of it.Thanks to Don Robinson and his great video. It's made with 3/32 Cpm 154 blade and backspacer and...
  20. SBuzek

    Tap Holder

    I'm fixin to start some folder and remember seeing some one haveing a small tap holding fixture,Have searched but cant find it,Anyone making them or have some pic's so i can see how to make one myself. Thanks Stan
Top