Recent content by rob45

  1. R

    How are you keeping your shop cool during the summer?

    Humidity is the real bummer. One of the ladies I work with lived in Vegas for 25 years; she came back here a year ago and had an unpleasant reminder of effects of humidity. If I can get humidity under control, the heat is more bearable. The small window AC unit in the shed does a decent...
  2. R

    Evenheat vs Sugarcreek Ovens???????

    I have the 24" kiln from Sugar Creek, and I am impressed with the overall value (features vs. cost). I do not own, nor have I used, the Evenheat. But were I to require a kiln on a regular basis (read: the need to HT has progressed beyond the "hobby" level), I would give the Evenheat serious...
  3. R

    Rolling mill

    They're not as common, but I've seen some of the mills that have independent adjustment for each side of the roller. Most keep the rollers parallel while allowing one to move vertically for thickness changes. The ones that have adjustment on each side of the roller actually allow you to angle...
  4. R

    ebay damascus

    Why not just put Randy and Junior to work? Something from a fellow Dog is always a good thing.
  5. R

    Files

    Simonds is another American brand; sadly, they also outsource (the company's name is Simonds International). IIRC, I have some newer ones that say made in Spain. But from my experience, they seem to work OK for the price. The German files with which I have expewrience were made by Friedrich...
  6. R

    Files

    Mike, The file cut system works kinda like sanpaper. Rough to start, smooth to finish. As noted above, the size of the file has an impact on the cut. Even though two differently-sized files will be designated with the same cut, the actual cut will be different. For instance, a 6 inch...
  7. R

    Cast Iron

    Something to keep in mind is that Rob may be dealing with "mystery metal". This is akin to someone asking: "Can I make a knife out of this file?" "Will this old saw blade make a good knife?" "What about this leaf spring?" So the person asking the questions represented above are gonna...
  8. R

    deburring wheel coated with rouge?

    Probably best to use the rouge on a dedicated buffing wheel. Bad things happen when different abrasive materials are mixed.
  9. R

    Cast Iron

    Sounds like a good idea. Experiment with it and see how you like it. Porosity is really gonna depend on the individual piece. (There are many types of "cast iron".) Sometimes porosity can actually provide a look that really compliments the project. Depends on the effect you're after...
  10. R

    Straight from the Quench--Using a pattern makers vise.

    Aw, Fred! Now you've got all of us running out to find a hard-to-find and expensive vise! I used to have a patternmaker's vise; traded it years ago for a set of band wheels. Been looking for a reasonable replacement ever since. Thanks for sharing the idea. Rob
  11. R

    Bandsaw nigtmare!!!need some help...please!

    It doesn't happen often, but there have been a few instances where I actually measured the blade and it was definitely not the length as was labled on the box. If the blade is within the spec stated on the machine, it's gotta be the machine. The manufacturers are supposed to provide some...
  12. R

    Mystery Wood - Need some help identify it.

    There appears to be burn marks in both woods. Caused by several factors, but most commonly by a dull blade, improper/inconsistent feed rate, or both. Some woods will be more subjective to this than others. If you think they're both domestic hardwoods, cherry and maple suffer the burn marks the...
  13. R

    need help w/handle material

    Buck, if I were in your situation I would definitely hook up with Mike and work out a deal for some of that pink ivory! It is a rather difficult wood to obtain, but I believe it will give you the look you're after. I've had some that ranged from a "brownish pink" to some that was a deep...
  14. R

    Do blade coatings slow quench speed?

    Yes, I believe it's gonna have an impact on quench speed. How much of an impact will probably depend on the "small details". Can't speak for how much of a difference a certain coating will affect a certain steel in a certain quenchant. But I do know that if I want a differentially-hardened...
  15. R

    Rebuilt my Disc Grinder today

    Looks good, Dwane. Bet your motor belt is thanking you for making the conversion from horizontal to vertical disc.:happy:
Top