View Full Version : ARS OTF Tanto Model
05-19-2010, 12:17 AM
ARS OTF Tanto Model. YES, there will a few at BLADE to handle and get a look at.
Milled aircraft grade aluminum handles, hex screw construction, draw bar blade return, and a bead blasted ,non reflective blade.
05-19-2010, 07:28 AM
05-19-2010, 08:04 AM
05-19-2010, 08:40 AM
05-20-2010, 06:08 AM
thanks fellows . i am waiting for blades to get back from heat treat so i can finish the other ones.
Rick Haney Design
05-21-2010, 08:14 AM
05-22-2010, 08:00 PM
Mmm, yeah, Beefy construction!! I would feel geared up carrying that knife into combat.
Any Idea about the cost on one Alex? Thanks, Dave.
05-23-2010, 07:09 AM
i am thinking around 285.00 retail.
05-25-2010, 01:40 AM
SPECS; Handle is 5 1/8 long, blade is 3.5 long thickness of handle is .397 thick which is thin for an OTF.
Blade is .120 thick ATS-34 steel.
The blade will have a bead blasted firing button and blade with the ARS logo on it.
05-30-2010, 02:57 PM
Very nice. Good design. I want one.
05-30-2010, 05:32 PM
good to have you here jonathan!
05-30-2010, 08:54 PM
Very nice, great design and nice pricepoint. If they are as reliable as they are otherwise well thought out, and US made then I expect you will have a big hit on your hands.
06-01-2010, 06:38 AM
they are nice! couple of small things i have to change ,they should be in production 1 month after blade. everything is usa made on it. the steel is ats 34 so japenesse.
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.