PDA

View Full Version : Sabot Flipper liner lockTAC-Ti™ WIP



Curtiss Knives
11-07-2009, 04:11 PM
Here is a new twist on doing scales. Instead of the traditional material, I am using my TAC-Ti™ with a twist. I had to cut the scales first, then contour them to get the feel. After that, make a fixture to re-run the parts to do the texture pattern. Then of course start the fit and finish. Still haven't decided on the final look of this knife, but it will come to me. Thanks for looking. 2thumbs
http://www.knifedogs.com/attachment.php?attachmentid=2741&stc=1&d=1257635389http://www.knifedogs.com/attachment.php?attachmentid=2742&stc=1&d=1257635389http://www.knifedogs.com/attachment.php?attachmentid=2743&stc=1&d=1257635389http://www.knifedogs.com/attachment.php?attachmentid=2744&stc=1&d=1257635389http://www.knifedogs.com/attachment.php?attachmentid=2745&stc=1&d=1257635389

Curtiss Knives
11-07-2009, 04:12 PM
More pics.
http://www.knifedogs.com/attachment.php?attachmentid=2746&stc=1&d=1257635519http://www.knifedogs.com/attachment.php?attachmentid=2747&stc=1&d=1257635519

stabber
11-07-2009, 04:15 PM
:eek:I'm diggin that Dave!! Sweet!!!2thumbs

Curtiss Knives
11-07-2009, 05:29 PM
Thanks. Still got a lot of clean up and finishing.

Bill Coye
11-07-2009, 05:37 PM
That's killer. Period.

BC

Curtiss Knives
11-07-2009, 07:41 PM
Why thank you Bill.;)

Curtiss Knives
11-09-2009, 01:22 PM
Heres the finished set. Orange peel liners and bolsters. Deep blasted scales with highlighted tops.
http://www.knifedogs.com/attachment.php?attachmentid=2786&stc=1&d=1257797972http://www.knifedogs.com/attachment.php?attachmentid=2787&stc=1&d=1257797972http://www.knifedogs.com/attachment.php?attachmentid=2788&stc=1&d=1257797972http://www.knifedogs.com/attachment.php?attachmentid=2789&stc=1&d=1257797972http://www.knifedogs.com/attachment.php?attachmentid=2790&stc=1&d=1257797972

Brett Long
11-09-2009, 01:26 PM
that is a sweet looking project..2thumbs

Curtiss Knives
11-10-2009, 09:19 AM
Thanks Brett. cool 1

Curtiss Knives
11-17-2009, 10:18 AM
More pics in progress.

Curtiss Knives
11-17-2009, 10:37 AM
A few more pics.

John Barker
11-17-2009, 11:29 AM
Oh yeah! That turned out very nice!
-John