PDA

View Full Version : camp knife



Andrew Takach
10-16-2009, 01:18 PM
Forged down from some W1 round stock that i got from Decker on the forum.

This camp/pack knife measures in at 12 1/4'' o.a., with a 7 3/16'' blade. The width at the widest point is just over 1 1/2''. The spine is about 3/16'' thick.

The tang has a slight forged in taper, and the balance point is right at the plunge cut. The blade is flat ground with a slight convex edge. The blade was hand rubbed to 800grit and then clay quenched and eched. I followed up the etch with some polishing paste to bring out the hamon.

The handle is African blackwood and the pins are hand piened nickle silver(1/8'')

Price shipped including a hand stitched belt sheath is $220

Paypal or postal money order are acceptable

Paypal address is a-takach@takachforge.com

thanks for look'en

http://takachforge.com/images/103_0003.JPG

http://takachforge.com/images/103_0005.JPG

http://takachforge.com/images/103_0004.JPG

http://takachforge.com/images/103_0006.JPG

David1911
01-09-2011, 07:17 AM
Is this knife still available?

Thanks David

Andrew Takach
01-09-2011, 07:50 AM
no sir, but have made severaql similar since then. email if interested.

thanks
andrew