Two small skinners

[jkf96a]

These knives are my Mini Skinner. It’s a small three finger knife, with an OAL of 6 inches. I like this size for skinning raccoons and other furbearers. I skin with them hanging, and this little knife is all that I need to get the job done.

The first knife is my first adventure into mammoth ivory. I chose tan ivory with some visible grain. The knife is 1/8″ 1080 bar stock with fish filework, black liners, and brass pins. $200.

The second is also a mini skinner in 1/8 1080, with black micarta handles w/ red liners, stainless pins, and cross filework. $125.

Both come with an ambidextrous horizontal carry sheath made by 5D Leather here in Abilene, TX.

http://www.greenbuggraphics.com/jasonfry/wp-content/uploads/2009/09/100_2698-1024x682.jpg

http://www.greenbuggraphics.com/jasonfry/wp-content/uploads/2009/09/100_2708-682x1024.jpg

http://www.greenbuggraphics.com/jasonfry/wp-content/uploads/2009/10/100_2736-300x200.jpg

http://www.greenbuggraphics.com/jasonfry/wp-content/uploads/2009/09/100_2707-200x300.jpg

BIG pic, that includes the sheath can be found here.
http://www.greenbuggraphics.com/jasonfry/wp-content/uploads/2009/10/100_2735.jpg

[jkf96a]

Down to $175 and $115.

[BossDog]

nice to see some creativity in file work.
t

[marekz]

Nice work-marekz

[jkf96a]

Micarta is sold.

[jkf96a]

Hate to reduce again, but I need supplies. Still figuring out where the market is on the mammoth stuff also. Try $165.

[gear2survive]

I like the momoth very much has it been sold ?

[jkf96a]

Mammoth is still around, gear2survive.

[jkf96a]

SPF, thanks.