View Full Version : My models
10-15-2009, 03:57 PM
Here i am going to show my modells.
This is what i call a light chopper. I make it from 5160 6 mm thick and SS RWL34 7 mm thick, 220 mm long and 40 mm wide.
Then i have my survival modell. I make it from 6 mm 5160, 4 mm CPM154CM and CPMD2.
This one i call Budgethunter and i make it from a Swedish SS AEB-L 3,5 thick.
C-0,65 Si-0,4 MN-0,6 P-0,02 S-0,015 CR-12,8
I make one with wood handles and one with micarta and G10. I both flatgrind and convexgrind them. The wood handle variant is with leathersheat and the one with micarta/G10 with kydex.
This one i call Rustic and i make it from 3,5 mm AEB-L and O1. Its 30 mm wide and 200 mm long. This one have handles of stained crotched maple.
This one i call short hunter and is made of 6 mm 5160. But i make of 4 mm CPM154CM to.
Here is a utility i make from 3 mm 440C its 195 mm long and 25 mm wide.
A small fishing knife maybe for the vest. its made of 3 mm 440C to and is 195 mm long and 20 mm wide.
This model i call EDC and i make it of 6 mm thick 1870 and 3,5 mm thick AEB-L.
10-16-2009, 01:51 PM
This is a Nessmuk knife made of 3 mm thick 26C carbonsteel.
Here is a scandi made with my utility blade. The steel is AEB-L and is 3,5 mm thick. the handle is valnut and reindeer antler. The sheat is semi rawhide.
This one is made on one of my moose blades. Steel AEB-L handle is masurbirch tin and black spacer. Sheat is of semirawhide.
This one have a blade of polished 440C and handle in stained masurbirch. Sheat of carved shaft leather.
This one have a blade made from O1 and have handle of of black bog oak and riojakaranda. With sheat of carved shaft leather.
This one is made with one of my grouse blades of AEB-L. The handle is from bogoak and stabilised masur. Sheat made of shaft leather.
10-16-2009, 04:59 PM
Very nice work on both the knives and the sheaths. Beside looking good they look like they will handle any task you give them. Please show us more.
10-17-2009, 03:26 AM
Thank you Denton Eller:D. There will be more knives like this. I am working now on a couple of choppers in 6 mm 5160. I want to make knives that is sturdy and hold up for almost everything. Some one said that my survivalknife with convex grind looked bulletproof. LOL
10-17-2009, 08:24 AM
Seved, nice knives. I always enjoy seeing the Scandinavian influence in knives. The lines are different and so are the materials. I see a lot of Birch used in Swedish knives. Is there a lot of it around there?
10-17-2009, 10:22 AM
Thanks Tracy :D. I like to mix the scandinavian way and the American way to make knives. Yes one thing that is great with the Scandi knives is the lines. Birch is very common in sweden and pretty much in Norway to. The Finns use much birchbark. I have found some birchmasur but it havent been so nice. Pretty much of the birch come from Russia and Finland at least the birch that the dealers have. Birchmasur is one of my favorit woods boxelder another and crotched woods is great.
Hi! I really like your knives, they look functional and beautiful. What do you use as a finish on the wooden handles of your knives?
10-18-2009, 01:01 PM
Thanks Mook:D I use aprox 60/40 linseedoil and what we call balcamterpentine then i mix it with some upwarmned beewax.
10-18-2009, 07:08 PM
I like your Sweden styles best and the sheaths. Would you tell us how you make that style of sheath? I have made a couple for fillet knives but dont know the correct way to stretch and stitch. The strap too.
10-19-2009, 01:39 AM
I have thought of making a tutorial on how i make the sheats for a long time now. Maybe i should do that now.:) Maybe i should put one here and one under the tutorial thread.
Yes you can have nice lines with scandiknives i think.
05-19-2011, 02:37 PM
My EDC model. I make it in 3,5 mm thick SS AEB-L and a carbonsteel 3 mm thick UHB15LM. This modell is 160 mm OAL and 30 mm wide.
10-06-2011, 07:37 AM
I have just finished this two blade blanks they will have Paracord for handles so i drilled a little biggar holes. The steel is 1874 a swedish carbon steel, That is 6 mm thich, 32 mm wide and 167 mm long.
And this is what i call Ninja necker and have a sabergrind.
10-23-2011, 11:39 AM
Both finished and will be shiped tomorrow.
11-13-2011, 06:16 AM
I just finished this one. A Survival in 6mm 5160 and with handles in crotched ash.
12-24-2011, 08:28 AM
I just finished the sheat to this one.
02-19-2012, 09:33 AM
I just finished a blade for my newest modell Forest.
02-28-2012, 08:20 AM
This is a new modell i have made. I call it Forest, becouse its as near a perfect woodsknife you can get, if you ask me. But thats different from from user to user i gues. :)
Bladelegnth: 155 mm
OAL: 265 mm
Steel is 3,5 mm AEB-L
It weigh 200 gram with Desert Ironwood scales.
Here is some pics on the finished knife :D
03-11-2012, 12:29 PM
I just finished to blades for my necker model. I i took a picture with my EDC model, to see the differensis. The thick necker is 6 mm thick.
And here is one with Micarta handle.
05-01-2012, 11:22 AM
I just finished this two. A EDC in 3,5 mm thick AEB-L SS and a necker in 6 mm thick 5160
05-01-2012, 04:18 PM
I like them both great size and shape. Wade
05-02-2012, 03:24 AM
Thanks Wade :D I am glad you like it. :D
Here is what a guy over in US thinks about a simular EDC as above:
That knife is fantastic. I use my knife all the time. It is a perfect size and an excellent general use knife. I keep it very sharp at all times because it seems to me that if I let it get dull, it would take a lot of work to resharpen.
The shape is great for what I do with it. General farm utility work. The micarta handle is extremely grippy, which is great when my hands get covered in slick Maryland clay (working in the garden).
Janene only uses her knife in clean, indoors activities and basically spends more time looking it at. But I guess if my knife looked like that, I'd be more hesistant to use it cut loose baling twine out of the manure spreader too.
My knife would make an excellent production model, just as it is.
05-03-2012, 11:04 AM
I have some new pics o the previus page on the Forest with sheat.
06-27-2012, 04:32 PM
I just finished this little axe. Just the handles left :D
07-01-2012, 01:52 PM
I made a blade today, a new modell, i call it Chubby. It is ment to be a gutting and skinning knife.
07-04-2012, 12:05 PM
Two more...... Choppers :D
The second 10 mm thick
07-22-2012, 11:27 AM
Here are a gutting knife, made by a friend on my blade. A chubby little knife.
09-18-2012, 10:42 AM
Just finished this Puuko for my brother in law, handle in valnut and 3 mm carbonsteel UHB15LM.
25 mm wide och 110 mm long.
10-24-2012, 09:55 AM
The chubby and tall one :D
The first one is a short chopper in 10mm thick 5160 steel. Its 220 mm long and 45 mm wide, handle in stabilsed crotched valnut . The Machete is in 3 mm thick UHB15LM carbonsteel, i have to comeback with the legnth and width . The handle is in G10.
11-10-2012, 10:18 AM
At last i finished a Micro blade, http://i171.photobucket.com/albums/u288/seved/Micro.jpg
This picture it is on top of my big EDC
01-05-2013, 07:18 AM
I just finished the sheat to the fat one.
01-10-2013, 10:50 AM
The Zombiekiller is ready for use, if there are any around.
01-24-2013, 09:20 AM
The first Big EDC made in 3 mm 1095 with handle in green/black G10.
Bladewidth:35 mm Bladelegnth: 85mm OAL: 200mm
01-25-2013, 06:48 AM
Some new pics :D
01-26-2013, 05:46 AM
Really like the looks of this one. Ready for any tasked asked of it. Nice knife.
01-26-2013, 05:48 AM
Thanks buddy, thats exactly what i am want with a knife, sturdy and good locking :D
Nice to hear from you, long time since.
04-14-2013, 11:07 AM
I had to do somethingelse today. I have ground blades for hardening, for 2 days :lol: .
A skeleton in 6 mm 5160.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.