PDA

View Full Version : Small wheel bearings



Les George
09-24-2009, 06:10 PM
Hey boss, I need to get some new bearings for my small wheels, do you have them or can you tell me the specs so I can find me some? Thanks! :)

BossDog
09-24-2009, 06:38 PM
I don't have them or the specs. I bet Rob will come on here and let us know.

Les George
09-24-2009, 07:48 PM
I checked your site earlier.... ;)

Jeff Pearce
09-24-2009, 07:50 PM
hey are they the 1 1/8"od x 1/2" id. i think that is what mine where

rfrink
09-25-2009, 07:14 AM
Les, The bearing is a: "R6-2RS"

They press onto the ends of the shaft...very simple to replace.

This is a standard english size deep groove radial ball bearing with rubber seals. Any local bearing shop will have them on the shelf.....currently we have a little more than 400 of them.

The shipping cost will probably be as much or more than the cost for the bearings....so getting them local will be the most economical.

But if you run into a snag...we'll be glad to send them out to you. Feel free to use our online order form and we'll get them headed your way on the next business day.


-Rob

12345678910
02-06-2010, 11:15 AM
Les, The bearing is a: "R6-2RS"

The shipping cost will probably be as much or more than the cost for the bearings....so getting them local will be the most economical.
-Rob


That's good info thanks !
Note this is for the small wheel attachment

The size listed for that part number is:
Bearing dimensions: 3/8" x 7/8" x .2812"
Inner Diameter: 3/8"
Outer Diameter: 7/8"
Width: .2812" 9/32"


Jeff, I believe that you are looking at a large contact wheel
"Jeff Pearce hey are they the 1 1/8"od x 1/2" id"