View Full Version : anyone have a parts list for building a propane forge burner

10-10-2010, 12:36 PM
The forge is going to be made from an old air tank about 30"long and 12" I want to use 2 burners it is not going to be a forced burner, I know there are several sites to get the plans and list but actually most have so much info they are confusing to someone new to forging
Thanks Anthony

10-10-2010, 03:31 PM
I got my burners from Zoeller Forge. Nice to work with. Here is his site. http://www.zoellerforge.com/


Bob Warner
10-10-2010, 04:05 PM
This is the burner I have used on my forges in the past, makes a great burner for all the damascus I have made over the years.


10-10-2010, 05:48 PM
Thanks Bob that is exactly what I wanted . Did you get that folder built yet? I'm gonna have to make it over there again before hunting season gets into full swing.

Bob Warner
10-10-2010, 06:04 PM
Got sidetracked building a surface grinder. It appears I cannot grind flat and parallel and stay within a couple thousandths of an inch.

If I remember correctly the jet size is a #52 drill.

10-10-2010, 09:05 PM
It would be nice to have a surface grinder I saw one convertered to yse 2x72 belts at Johnny Stouts shop , You will have to send me pics of yours I would love to have one just dont have the room maybe I will just have to rent yours lol.

10-11-2010, 08:47 AM
I have decided to go ahead and make the forge forced air?

Rusty McDonald
10-11-2010, 02:39 PM
Just finished building a new one for me and tried a new way to run the burner. It makes the gas easy to adjust. Ill get a pic later and post it.\

If you look at the pics you can see how it works, 1.5 square tubing with a hole for the 1/8" black pipe. Lets it slide in or out to adjust on the fly and the air is adjustable on the damper.


Bob Warner
10-11-2010, 02:47 PM
I have a forced air burner design put together already if you want to come check it out.

10-11-2010, 09:05 PM
I like the way this guy mounted the forge to this metal table. if I didnt have a lot of the parts already I would probably just buy this one. http://dallas.craigslist.org/dal/tls/1979500838.html

Indian George
10-12-2010, 11:23 AM
Check this out.

john smith
10-13-2010, 07:36 PM
I built my burner from plans from zoeller forge.
it works great and he has a simple plans/parts list to follow.