PDA

View Full Version : available update



Les George
06-30-2010, 03:12 PM
Good afternoon from South Texas!

The first hurricane of the season is about to make landfall in a few hours, fortunately it appears to be headed in far enough south of us to not be a huge problem here. We are going to get a bunch or rain and my biggest problem will be losing power if that happens. If we lose power and I am outta touch for a while, donít worry I will get back with you ASAP.
Until then though, itís pretty much business as usual. So I have some things available that I thought you might like to know about.
First and foremost, a few Extra Small Rockeyes (ESR) that I introduced at Blade show earlier this month with great success. This little project has been about 6 months in the works and has resulted in quite a little, big knife! The blade is 2 5/8 long, .205 thick and itís about 6 Ĺ inches long over all. The blade material is CPM 154, the liners and clip are titanium and the scales are CNC machined G-10. All are tip up. I have them in Black/Grey and OD Green G-10 for $325 plus shipping.
http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4908.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4910.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4911.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4914.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4922.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4926.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4927.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/ESR/IMG_4932.jpg


I still have a few of the Cerberus knives left, those are $575

http://i216.photobucket.com/albums/cc48/gtasteel/cerberus/IMG_4850.jpg

Hereís an update on the 1911 grip inventory. The plane G-10 are $50 and the two tone and the carbon fiber grips are $70. If I donít have the configuration that youíd like, I can get it made up for you, if youíd like your own custom grips, I can help with that too, just let me know.
http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4885.jpg

http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4892.jpg

http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4895.jpg

http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4937.jpg

http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4905.jpg

Been wrapping up some of my little projects this week and I also have some more of the titanium pry bars available for $80. These fit in the MOLLE loops and I think they work well to save knife tips when you need to open something up.
http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4939.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4940.jpg


http://i216.photobucket.com/albums/cc48/gtasteel/post%20pics/IMG_4183.jpg





Thanks for looking, let me know if youíd like to get something listed here.
Thanks for the continued support!
Les

Les George
06-30-2010, 06:21 PM
ESRs all gone, thanks! :)

Les George
09-02-2010, 08:52 AM
All sold, thanks... :)