- 1095 Heat treat in a straight format........
- keeping it straight
- Chemistry considerations in heat treating operations.
- True or false, 154cm
- Question on Heat Treating
- CPM M4 hardness
- Straightening During The Temper Cycles
- Heat Treat FAIL !!!! Help !!!
- HT idea will it work?
- Spec Sheet for T18?
- Pitting problem ?
- Heating Element Limitations
- Question on initial grind before heat treating on carbon steel ???
- Heat treat for 1050
- 154cm
- Im doing it!!
- Temper time
- Basics of heat treating; building our toolbox.
- Annealing 1095
- 1095 hardening question
- Your Heat Treating Tool Box
- Possible way to straighten a blade
- Goodman/Holmes Forge
- Any EvenHeat 120V Users Here?
- Heat treating question- Soak times
- Tempering Question from Newbie
- Quench Oil Clean up
- Using a Pipe in a Gas Forge
- temper, and COLD weather question
- Heat treating S30v
- I got a heat treating foil question?
- Heat Treat and Engraving
- Straightening a warped blade...
- Tempering
- Stock Removal 52100
- A great Canadian heat treater !
- Chevron 70 quench oil
- 1095 Oil and Water
- A little experiment
- starting over
- Optimum size for a quench vessel?
- Do blade coatings slow quench speed?
- Some good reading...
- What size and make Cryo dewar should I get?
- Knife Test
- Is Parks 50 too fast for 1080/1085 steel
- I am trying to learn how to read the specs HELP
- CPM-S125v datasheet?
- Small Shop Stainless?
- Scen-Pak
- I have to ask a question on Canola Oil
- Anyone have any experiece with this in knife steels?
- Cpm-s35v steel question
- Heat treating books
- santanite
- First time working with 52100
- Edge Quenching 1095???
- W2 heat treat Vs. 1095 heat treat?
- I finally had to get some serious temp control - eager to use/play
- 440C, hardness?
- 154cm and cryo
- S 35 vn
- evenheat kf1136 stacked 36" vertical kiln plus cast iron retort
- Need HT Assistance.
- Elmax Heat Treat?
- Triple Quench for O-1......?????
- HT on a long thin 1080/15n20 blade? Help?
- warps and cracks HELP
- Treating Stainless, do you include multiple hold times??
- Carbon stock removal blades, annealing and normalizing??
- Quench tank
- 1gallon of Parks 50
- Heat Treating for a Hamon?
- Circulating style quench tank.
- Why soaking is important?
- Annealing
- O.K. I give!
- Synthetic Motor
- Normalizing
- Fast quench oil specs
- table salt as temperature indicator
- O1 Hardness
- annealing CPM-154
- Temps and Times for different steels?
- homemade electric heat treat furnace
- Heat Treating experiment for Hamon
- Heat treat information for A-2
- Stress Relieving
- video trained sworsman cutting - see forces HEAT TREAT IS VITAL
- Mystery steel ID?
- Some newbie observations, and a question.
- Neycraft Kiln Pyrometer off
- Did It Get Too Hot?
- blade bending during heat treat
- Hamon lines
- heat treating question?
- heat treathing fora begginer
- Quench Oil Recomendations
- heat treating and tempering 1084 for beginner
- Hardening Part 1
- Shattered blade Condor
- Heat treat help for newbie?
- Hamon material/media
- Thoughts on quenching with water before or after oil?
- A tale of two knives
- Retrofitting a pottery kiln
- Heat Treating Is An Art
- Propane tank quench tank
- Oven size?
- CPM 3V surface decarburization?
- bareing race
- Muffle HT
- Help with D2
- Burning Canadians on Parks 50
- gang saw blades?
- Blotchy Etch in 1084
- Contaminating Quench Oils
- Hot Bluing O1
- 10 second quenching oil
- Tempering A pry bar
- Heating element
- Stainless blades in a propane forge?
- All the cool kids are doing it, water quench
- Kevin Cashen on PBS Nova
- JD straw chopper blade material?
- heat treating 52100
- heat treat questions
- Another Quench Question
- Edge quenching 1095 ????
- Trying to Put together plans for a 110V Home Made HT Oven
- Re-HT'ing An Already HT'd Blade
- Heat treating damascus steel
- Could it be the "Foil" ?
- Edge quenching 1095, results and questions, (but more questions than results)
- stainless steel foil and kiln furniture
- Quench Tank
- Where to send 1095 and 1084fg for ht?
- Heat treating stick tangs
- Delaying the Temper?
- heat treating 1084
- ATS 34 oil quench or not??????
- Cpm-m4
- plasma cutting the knife blank
- Sugar Creek Kiln problems
- First Knife Finished!
- salt pot in kiln ?
- Induction heating plates
- Heat treating problems
- Issue with a 52100 blade
- several questions about circular saw mill blade steel fact or fiction
- Dunking hot steel
- thermisol 75
- quenchig O1 steel
- pyrometer with HT
- Sugar creek kilns
- Aldos 1075 katana heat treating question.
- Heat Treating Railroad Spike Knives
- Problems always problem when your running out of time.
- oops cpm154 annealing
- heat treating equip
- Heat treating 154 cm
- Hardening II- Quenching
- heat treating 9260
- heat treating and edge thickness
- Just finished hammering out my first blade...
- CPM 3v Destruction Testing and Etching results
- heat treating a file knife
- time to replace the temp probe (where to get a good new one )
- Heat Treating 1095 - Here is another way
- Heat Treating 1084 or 1080 - Here is another way
- Poor Man's Heat Treating Thread...
- Water Quench and Hamon Questions for 1095
- Scale control in a kiln
- Mixed Structures in Knife Steels
- Hamons with NO CLAY?
- Basic how to use an oven questions
- Why "Used" oil?
- Aldos 1075
- low temp salt bath
- Hardness before Temper- ATS34
- is the brass rod test reliable???
- heat treating furnace which one
- Grains, Carbides, and You
- Appropriate Cryo Methods
- Heat Treating for the 90 degree bend test
- First attempt to heat treat on charcoal forge
- Edge Quenching
- Quenching Speed, Carbon Content, and Maximum Hardness
- Recommend me a stainless?
- Quenching oil and 52100
- The Two Commandments of Heat Treating
- Extended use of high heat, heat treatings effects on kilns?
- Heat treating cmp 3v?
- The Trinity of Hardness
- Rc tester
- Heat Treating O1
- salt bath vs oven
- S30V, re-heat treat?
- Had to stop and now I have a question
- Vertical or horizontal for HT?
- Thank you
- Chevron Tecaco 70 quench oil
- Noobie questions on HT 1095
- dry ice
- New TOY!!
- Patience grasshoppah' It's 1095
- So what did we just learn aboout 1080
- Borax as Anti scale powder
- Another new guy for you to teach (HT1084)
- Anyone Know Len Landrum's 52100 HT Recipe?
- Huge Stringers
- heat treat O1 in a kiln questions
- zero edge HT of oil quench blades
- Problem with O-1 or is it me???
- 1084 ht
- Difference in Rockwell on 440c and Cpm154
- Temperature fluctuation?