wmhammond
Well-Known Member
WOW! Just finished my last two orders for Christmas. One was a three knife order - a buddy of mine wanted to give each of his three grown son's a Hunting Knife for Christmas. Here they are all just alike but none the same. Each is:
Blade: 440c Mirror finish
Bolster: 416 Mirror Finish
OAL 8 1/4”
Blade Length 3 1/8”
Blade Width 1 1/4’”
Stainless Steel Pins
Handles: Ironwood with an Ebony Cap, Mesquite Burl and Box Elder Maple Flame
Thickness at the tang 5/32”
Time of fabrication – 62 hours
Sorry I doubled up on the pics, I don't know how to delete the second set :1:
The other order is a Filet' knife of my own design. It is:
Blade: 440c Mirror finish
OAL 11 1/2”
Blade Length 7 3/4”
Blade Width 13/16’”
Brass Pins
Desert Ironwood with Tru Oil flat finish
Thickness at the tang 3/32”
Time of fabrication – 11 hours
Thanks for looking. Comments are welcome and appreciated.
Wallace
Blade: 440c Mirror finish
Bolster: 416 Mirror Finish
OAL 8 1/4”
Blade Length 3 1/8”
Blade Width 1 1/4’”
Stainless Steel Pins
Handles: Ironwood with an Ebony Cap, Mesquite Burl and Box Elder Maple Flame
Thickness at the tang 5/32”
Time of fabrication – 62 hours
Sorry I doubled up on the pics, I don't know how to delete the second set :1:
The other order is a Filet' knife of my own design. It is:
Blade: 440c Mirror finish
OAL 11 1/2”
Blade Length 7 3/4”
Blade Width 13/16’”
Brass Pins
Desert Ironwood with Tru Oil flat finish
Thickness at the tang 3/32”
Time of fabrication – 11 hours
Thanks for looking. Comments are welcome and appreciated.
Wallace
Last edited by a moderator: