Tantos and a Bush Sword

Stormcrow

Well-Known Member
I had a couple of finished up tantos go out to a good customer recently. He's been waiting for the shorter one for a while, and picked up the longer one, which I had forged as a demo of using my power hammer dies, when I posted as available on Instagram. The shorter one is forged from 80CrV2, with a 9 1/2" blade. The longer one is 5160, with a 12 1/2" blade.

33764664402_0e7931d093_c.jpg


I did a bit of a variation on my usual wrap with these, matching a wrap I had done on a chopper for him last year. Over a foundation of neoprene is an underlay wrap of white bleached hemp cord, with tan paracord for the overlay. And, of course, tan Kydex.

33791990381_40fc258cbe_c.jpg
[/url]

He sent me a video of him hacking up a large pumpkin with the longer tanto. Made short work of it. :)

And this bush sword was one that I had forged a while back and had the customer disappear on me. It was kicking around the shop for a while until another customer bought it as his first custom blade. It's forged from 5160, with a blade length of around 15" - 16" and an integral socket handle.

33640600783_504bcf764e_c.jpg


I had made a Kydex sheath for it, but the customer also got a leather sheath with baldric rig for it from fellow knifemaker Luke Swenson.

33640603223_cc76bacc3c_c.jpg


Nice little detail on the leather, Luke!
34291014592_d68d5cc241_c.jpg
 
And a couple more bush swords in 80CrV2 steel, with integral socket handles, black paracord, and 16" blades.

33609147594_835d251194_c.jpg


And black Kydex.

34320814291_cbd6c788d6_c.jpg
 
Back
Top