My belt storage solution

Smallshop

KNIFE MAKER
So I'm in the middle of a shop "remodel" and I realized I don't really want to give up wall space to hold belts. I have 12' ceilings in here and a nice beam running through the shop....so...
DSC01029.jpg

the 87 cent solution. a plastic bowl from 99cent store, $4.00 box of fender washers, Bulk screws $ 1.99 a Lb. Drilled a hole in the center. Then when I get them all finished I write on a disposable plast plate the grit,etc.

DSC01030.jpg

...and tape it to the bowl.


plenty of room to walk under....

DSC01032.jpgDSC01033.jpg

and easy to lift down or put up with the cheesy hook I rigged up.

No wasted space.....not fancy but definitely on budget...lol. strong enough for air hoses and extension cords so I put plenty up....

Ted
 
Back
Top