Saddlehorn slipjoint

Craig

KNIFE MAKER
I made this one for a tutorial last year. 3 1/2 inches closed CPM154 blade and spring integral 416 liners and bolsters with some bone I dyed and jigged.

SH1.jpgSH2.jpgSH3.jpgSH4.jpgSH5.jpgSH6.jpg
 
Last edited:
Hey Craig! Beautiful knife as usual! Thanks for the tutorial as well. What size end mill do you use to mill your relief in the liners? Thanks again!
 
For the relief at the pivot I use a 1/2 inch or 5/8 inch depending on the size of the knife. Carbide with a .030 radius edge.
 
Back
Top