I bought an evenheat ko 18 several months ago and have been second guessing the low temps, so I fired up my homemade oven with an auberins pid and decided to check it with another pid and thermocouple.
I drilled a hole thru the door and inserted a k thermocouple and the readings between the 2 are 30 degrees. I hate to drill a hole in my knew oven to check the pid and thermocouple against the rampmaster control. I put several oven thermometers in the oven and nothing seems to line up with either pid. Any advice would be greatly appreciated. Ed Caffrey gave me the idea on the extra pid and thermocouple, I didn't buy the one that he recommended because I already had one and wanted to save a little money. Thanks in advance for your help.
Rickey
I drilled a hole thru the door and inserted a k thermocouple and the readings between the 2 are 30 degrees. I hate to drill a hole in my knew oven to check the pid and thermocouple against the rampmaster control. I put several oven thermometers in the oven and nothing seems to line up with either pid. Any advice would be greatly appreciated. Ed Caffrey gave me the idea on the extra pid and thermocouple, I didn't buy the one that he recommended because I already had one and wanted to save a little money. Thanks in advance for your help.
Rickey