Started a new Forging Press Projekt

Doc404

Active Member
I have a slow 75t Forgingpress works fine but slow, now I wish something fast and strong.

Last days there are a few hours to spend, first I buildet a rolling Frame for it and installed 5,5 kw Pump and 42L Oil Reservoir.
This should strong and fast enouth.

Next step will be building the Frame for shown Zylinder witch is a real Monster.

enjoy Torsten
 

Attachments

  • 005zzzzzzzzz.jpg
    005zzzzzzzzz.jpg
    87.8 KB · Views: 55
  • $_57 klein.JPG
    $_57 klein.JPG
    43.2 KB · Views: 57
Last edited:
If you whant, I will do, there is no secret!
But I can talk only in bar,mm, cm, m hope this will not a Problem.

Torsten
 
rough paint

will start next daysm so I need Steel and an Idea.

Torsten
 

Attachments

  • Bild 443 klein.jpg
    Bild 443 klein.jpg
    117.9 KB · Views: 56
first pic´s

cuttet and milled some Steel from my don´t throw away corner, not welded at this moment only the start of the build.


TorstenBild 449 klein.jpgBild 447 klein.jpg
 
Some backjard Casting

needed some big Clamps for the Projekt so I smelted some Alu.
Have to be maschined next .



Any Interest004jjjjjjjjjj.jpg005kkkkkkkkkkkkk.jpg002kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk.jpgthis thread??

Torsten
 

Attachments

  • 003llllllllllll.jpg
    003llllllllllll.jpg
    65.1 KB · Views: 19
ready to complete with wiring valve,.... an a Little paintjob ist needed.
Torsten
 

Attachments

  • 001hgggggg.jpg
    001hgggggg.jpg
    64.5 KB · Views: 17
Back
Top