Forged belt knives

taylormadeknives

Well-Known Member
I have been making several of these little belt knives lately. I really like the size and functionality of them. I set them up for a horizontal carry with a kydex sheath.

c2f4dd1efdc19fad98563ff366509480.jpg


6af80c7be68b67ffe58a62cdc0fb0754.jpg


a0142314e892cb681e2861ac96ca76c6.jpg


3e284e57b0ef544f1d5f1f25166ff70b.jpg


fbcced4d2eb5737d07af38521a7ceb38.jpg
 
I like those alot Taylor I suspect they sell well. If you don't mind me asking what size is the tube and where do you get them I have looked online for larger tube and seem 1/4" is all I find.
Nice work!
 
Those look like a very handy little all around general purpose knife, something that could handle most routine jobs with ease. Nice job on the kydex sheaths as well.
 
I like those alot Taylor I suspect they sell well. If you don't mind me asking what size is the tube and where do you get them I have looked online for larger tube and seem 1/4" is all I find.
Nice work!
The lanyard tube is 1/4". I buy them in brass and aluminum at my local Ace hardware. I know lots of makers use 3/8" also. Not sure about it, I never seen the use in any larger than 1/4"
 
Those look like a very handy little all around general purpose knife, something that could handle most routine jobs with ease. Nice job on the kydex sheaths as well.
Thanks Jon, they sure are. These are real handy little guys and so easy to carry. I wear one everyday no problems. I touch the edge up with a fine diamond stone and hone with a glass rod. It stays sharp and easy to maintain. The kydex sheath is real comfy and functional
 
Back
Top