Very Bad Week Balisong

cardoso5fr

Well-Known Member
A very bad week. Wednesday when i was putting the tang pin in the blade... The hammer hitted the edge (115w8 oil hardened and flash tempered to the gold...). Hardened steel between hammer and anvil is not a good idea. A piece of blade flight .... I though to discard the blade. ....

Thursday, a lot of personnal worry... (nothing really important but that is never cool).

Friday.... I want to turn on my grinder... The speed variator did a "CLAC". And smell burned plastic.... It's dead..... I have no grinder...

I'm happy. As i wasn't able to work on another blade... I did handle for that scrap...

I save the blade as i could. I did g10 handle.... That flip well. but it's really iight

14 cm closed. 24,1 cm open, sharp 10 cm.

DSC00237.jpg

DSC00238.jpg

DSC00241.jpg

DSC00242.jpg

DSC00243.jpg

DSC00244.jpg

DSC00245.jpg
DSC00246.jpg


Poor flip session, there was a lot of wind and that was a bit difficult to catch the bali :D

[youtube]http://www.youtube.com/watch?v=G6SkJO71ONo[/youtube]
 
Back
Top