Search results

Hey everyone, turns out i kinda missed this, posting pictures, talking about knives. So, when i got these from my photographer, i went straight back here to post them. Hope you like it :) This knife is made from different patterns of Chad Nichols stainless damascus, mammoth molar scales and...

Hey everyone, i haven't been around for quite some time, but i thought this might be worth stopping by cause you might like to see this :) I made every part of this knife except the automatic coil spring that opens it. Otherwise, it's all me - the gears, pinions, bushings, even the tiny...

Hey everyone, this thing was actually supposed to be finished on my b-day in August, but as always, deliveries on stuff work mysterious ways, and though the watch itself was finished, i waited two months for the strap to be finished, and after that came in, i found out the two months wait...

Hey guys, i finally got around to do this, and hoping i'm in the right section, here's the first batch of pics. This is how it starts - just a bunch of stock - some titanium, damascus... there are some pieces still missing, but i will add them as i go along. fitting the dial material to a...

Hey everyone, haven't posted anything in a while, but here i go with something :) It's been finished for about two to three weeks now, and i got the pics from my photographer recently, so... here you go :) Just some specs - case - 50mm Nichols stainless damascus base, damasteel bezel...

Hey guys, i'm really happy about this one, and i hope Jim will be happy as well :) The blade is made outta 1095 steel, handle is a combination of mammoth ivory on carved damascus frame. Feel free to let me know what you think :) Thank you for looking, take care, Ondrej

Hey everyone, yes, i still make knives :) Here they are, two i finished for a customer, combination of Chad's damascus, damasteel, meteorite, abalone, mammoth ivory, and opals... The blades are about 3 3/4". Please feel free to let me know what you think :) Thank you for...

Hey everyone, i just got these pics yesterday, of a watch i finished for a customer last week. The case is titanium, dial and movement rotor is made from Milos Kislinger damascus. The movement is a Valjoux 7750. Feel free to let me know what you think, and if you have any questions...

Hey everyone, here's a little something i finished for a friend... Other than some specs, i don't think it needs anymore comments :) Case, backlid, crown, lugs - damasteel dial, rotor, back spacer ring - blued carbon damascus - Milos Kislinger movement - ETA 2893-2 strap - handmade...

Hey everyone, though i'm insanely busy lately, i somehow found time to finish this little baby for a customer... I always wanted to try a mokume and MOP handle combo, but i never really got to it up until now. I'm really happy how it turned out :) The blade is Chad Nichols multibar twist...

Hey everyone, here are two knives i finished the works on today. The first one i had just for some additional work - Jim and i, we decided it would look better with a damasteel pivot, rather than with the pinned one. It's the mokume integral with Eggerling blade i posted not so long ago...

Hey everyone, i just wanted to share this picture Kibi, my photographer, just sent me. I will post some more pictures and the full write-up on the watch as i get more of them. Thank you for looking, take care, Ondrej

Hey everyone, finishing this one was just a matter of putting on the thumbstud, but i just didn't have time to do it with the other two... So here it is, a bit later. The blade is Chad Nichols multibar twist, and the handle scales are Bob Eggerlings... i don't know what that is, but the...

Hey guys, i finally managed to finish something, and take pics. The only problem is, the pics suck :) There was very little light, so they are not as good as i would have hoped for... Anyway, one of them is an automatic dagger with damascus blade and mammoth tooth and damascus inlays, the...

Talk about keeping the thread titles short :D Anyway, guys, those of you who know me know, that i hate working with leather. I can't be clamped down, precisely machined... it really gives me a headache... So, when my dad came up with this, i was a bit nervous, cause he told me it would...

Hey everyone, I haven't shown around here for some time, but i been a bit too busy with work and everything. Sorry about that :) Anyway, i just finished this baby up, and thought i'd share :) The blade is Bob Eggerling mosaic damascus, button is made out of damasteel, and the handle frame...

Hey everyone, here are two things i finished today. The bigger one, obviously, is a knife for my buddy Jim, a small framelock with damasteel blade and pivot, and titanium...well, everything else. The second one, and i'm very proud i was asked to make it for him, is a Upotex wedding...

Hey guys, here are three babies i finished some time ago, but waited to get my pics from my photographer to post them :) I won't bother you with my blah blah, just some specs and then i leave you to looking at the pics:) #1 blade - 3" Nichols raindrops scales - 416ss, carved and mokume...

Hey everyone, i just got the pics of the watch i finished about a week ago, so i'm posting them for you to check out. Let me know what you think :) The watch was designed solely out of my head, without any customer influence, so i went a bit crazy - light skeletonization with an open...

Hey guys, finished a couple of days ago, a folder my buddy Gabriel ordered. Blade is 3" of RWL34, bolsters are titanium, and scales and backbar are orange G10. Let me know what you think :) Thanks for looking, take care, Ondrej