D.Douglas
Well-Known Member
Well here is a hidden tang damascus blade i purchased. The tang was not in the correct position on the blade i found when i started the build. It was to low and bent downward. I was being careful but had a blow out on the bottom part of the handle because i drilled a little deep. At least i will know were to put them when i start forging my own. White bronze guard and teak wood handle. I got a buddy i am going to give it to who helped me out with a few wood cases. The handle will get a little better finish and i better get busy with a sheath. Another thing i noticed is the blade is a little front heavy when i balance on a finger at the guard. I am not sure if that is good or bad. Thanks for the look. Doug
[/IMG]