Burl/Hamon/Filework File Knife *reduced*
This knife is my Triple D model. It's made from a Nicholson file, heat treated with an interrupted quench and etched and polished to reveal the hamon or transition line. The handle material is some Juniper Burl from Ruidoso. One side has some nice curl, and the other side has some burl eyes. It has a mosaic pin in the center. This knife also has arrowhead filework. My name is etched on the spine instead of my usual logo, since the blade is etched. I've got a right handed tooled sheath for this one. OAL is 7 1/2 inches with a 3 1/2 inch cutting edge. Reduced to $155 shipped.
A couple more pics I couldn't get to the right size:
Other side of the hamon
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3317.jpg
Other side of the handle
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3315-e1270850274220.jpg
Sheath front:
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3319-e1271117180402.jpg
Sheath back:
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3320.jpg
This knife is my Triple D model. It's made from a Nicholson file, heat treated with an interrupted quench and etched and polished to reveal the hamon or transition line. The handle material is some Juniper Burl from Ruidoso. One side has some nice curl, and the other side has some burl eyes. It has a mosaic pin in the center. This knife also has arrowhead filework. My name is etched on the spine instead of my usual logo, since the blade is etched. I've got a right handed tooled sheath for this one. OAL is 7 1/2 inches with a 3 1/2 inch cutting edge. Reduced to $155 shipped.
![100_3314-e1270848536812-1024x682.jpg](http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3314-e1270848536812-1024x682.jpg)
![100_3318-1024x682.jpg](http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3318-1024x682.jpg)
![100_3316-e1270849295752-1024x682.jpg](http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3316-e1270849295752-1024x682.jpg)
A couple more pics I couldn't get to the right size:
Other side of the hamon
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3317.jpg
Other side of the handle
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3315-e1270850274220.jpg
Sheath front:
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3319-e1271117180402.jpg
Sheath back:
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3320.jpg
Last edited: