Burl/Hamon/Filework File Knife

jkf96a

Well-Known Member
Burl/Hamon/Filework File Knife *reduced*

This knife is my Triple D model. It's made from a Nicholson file, heat treated with an interrupted quench and etched and polished to reveal the hamon or transition line. The handle material is some Juniper Burl from Ruidoso. One side has some nice curl, and the other side has some burl eyes. It has a mosaic pin in the center. This knife also has arrowhead filework. My name is etched on the spine instead of my usual logo, since the blade is etched. I've got a right handed tooled sheath for this one. OAL is 7 1/2 inches with a 3 1/2 inch cutting edge. Reduced to $155 shipped.
100_3314-e1270848536812-1024x682.jpg

100_3318-1024x682.jpg


100_3316-e1270849295752-1024x682.jpg


A couple more pics I couldn't get to the right size:
Other side of the hamon
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3317.jpg
Other side of the handle
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3315-e1270850274220.jpg

Sheath front:
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3319-e1271117180402.jpg

Sheath back:
http://www.frycustomknives.com/wp-content/uploads/2010/04/100_3320.jpg
 
Last edited:
Back
Top