Hunter

J. Hoover

KNIFE MAKER
This one is SOLD, thanks for the comment Darrin I appreciate it!!
I wanted to make a knife small enough to carry easy and not get in the way. At the same time I wanted it tough enough to split the chest cavity on deer size game. What I came up with is the knife below. I left the grind thick enough on the back third of the blade to cut through briskets while the tip is thinned for delicate skinning work. This knife was made to be used hard, not a cabinet queen. I took the pics before I placed my name on it but it is there now, on the leftside upper blade flat. Here are the specs:

Steel- 1095 X 3/16
HT- In house with three 2 hour temper cycles
AOL- 8 1/2 inches
Blade- 3 7/8 inches to front of guard with drawn swedges
Grind- Flat
Handle- 4 5/8 inches to front of guard
Scales- Desert Ironwood
Hardware- Brass guard, 1/8 brass pins, 1/4 brass lanyard tube
RH leather sheath was handsewn by this maker and is included. It will hold this knife securely for a worry free carry
Asking 150.00 shipped in the USA and Canada
Paypal or USPS M/O preferred
Questions, comments, or critiques welcome
Thanks for looking

001-5.jpg


002-3.jpg


003-2.jpg


005-5.jpg


006-3.jpg
 
Last edited:
Back
Top