The return of the"Twisted Cripple EDC's”

Jarrettknives

Well-Known Member
The return of the"Twisted Cripple EDC's”

(Everyday Carry Knives for the Workin' Man)


Note: There is a new and improved Kydex sheath design starting with this release.

TCEDCNewSheathDesign.jpg



Available for immediate shipment are numbers 18,19,20.
Numbers 21, and 22 are presently being finished. Somehow we got out of sequence. :D Short Bus
Numbers 23 is sold, 24, 25, 26, and 27 are just waiting for sheaths. This will add only one additional day to the process.


To see the video "Grinding The Twisted Cripple EDC" - click here

TCEDC12Star.jpg


Every Day Carry Necker’s priced right for the working man. This piece is a collaboration with my apprentice, CJ Powell, as we wanted to come up with something that would be affordable yet still the quality of all my other pieces. The run is limited to a maximum of 100 pieces, 15 at a time. Each knife is numbered on one side, with “JK” for Jarrett Knives on the other.

They are all individually made, not cut out by water jet or CNC. All work was done in house by hand in my shop including heat treating.

* Perfect for working around the house *
* Sized right for any task, at home or in the woods *
* Wear it under your fishing or bird hunting vest *
* Neck knives are useful on the job where repeated use or quick access is needed *
* Light enough for comfort, heavy enough to not swing around and bother you *
* Easy to clean and care for *
* O1 Tool Steel holds an edge forever, but is easy to re-sharpen if necessary *


A quality package - Only $125 + shipping USPS Priority Mail in The Continental U.S.

SPECS

OAL: Average 6” +/- .0625 (1/16")
Blade: 2 1/2” Flat Grind x 5/32” thick (we’ve increased the thickness by 1/64” from 9/64 for more durability)
Blade Steel: O1 Tool steel in satin finish; triple tempered
Handle: Black Linen Micarta
Pins: 1/8” 416 Stainless Steel pin and thong tubing
Sheath: : Concealex/Kydex; Black, with 27” Black Paracord lanyard and either a glow in the dark or whistle cord end closure
– unfortunately it will have to be our choice since it’s dependent upon what is in stock at the time.

TCEDC10LeftProfilewithTC.jpg


TCEDC10LeftHandle.jpg


TCEDC10RightBladewithTC.jpg


TCEDC10RightProfilewithTC.jpg


TCEDC10RightHandle.jpg


TCEDCButtInvertedwithTC.jpg

The choice of O1 tool steel rather than stainless for a quality EDC is for edge retention which to me is wear resistance, ease of sharpening in the field and edge stability combined. These EDC’s are laser sharp – that I guarantee. So much so that they may come with a tiny bit of arm hair left on them….just kidding.

$125 ; only $5.00 USPS Priority Shipping in the continental U.S. Just reply here in the listing with “I’ll take one” and we can work out the specifics.

International sales are very welcome but they must pay the exact shipping costs.

Paypal: paypal@jarrettknives.com

Also take a look in this forum for the TCEDC's Mean Uncles - the TC'ReCoN and the TC'SurVivoR! All built on the same design as the TCEDC but bigger, stronger and meaner!​

CustomSignatureBarHD.png

__________________
Best regards,
Wayne


Full Time Maker
Member of the Professional Knifemakers Association
www.jarrettknives.com

Be sure to check out the new Jarrett Knives Forum
 
Last edited:
Back
Top