LR Adkins
Well-Known Member
The first thing I would like to say is if you are building your own grinder the NWG is the way to go. It is well thought out and all the bugs worked out and is easy to build with little experience and tools. With a 2hp motor it is a metal eating monster and well worth the effort.
No, Tracey didn't pay me to say that
I built my grinder just to see what I could come up with using scrap metal that was lying around in my shop.
Here's how I put it together.
I had a piece of 2"x3" rectangular tubing left over from my last trike build so I cut an 18" piece to use for the base. Then I cut 4- pcs of 1" wide flat stock 1 1/4" long and drilled a 3/8" hole in each. then welded these to the ends of the base.
No, Tracey didn't pay me to say that
I built my grinder just to see what I could come up with using scrap metal that was lying around in my shop.
Here's how I put it together.
I had a piece of 2"x3" rectangular tubing left over from my last trike build so I cut an 18" piece to use for the base. Then I cut 4- pcs of 1" wide flat stock 1 1/4" long and drilled a 3/8" hole in each. then welded these to the ends of the base.
Last edited: