Chuck Gedraitis Knives
Well-Known Member
I have been under the weather the last few days. I finally felt well enough today to work on a knife and I finished it up a couple hours ago. Here are the finished pics along with the specs.
The blade is 3-3/4in long made of CPM 154 with a hand rubbed satin finish. The bolsters are 416 stainless that I stippled, I stippled the thumbstud as well. I also hid the bolster screws and blended them in with the stippling. The scales are black linen micarta and the liners are titanium. I anodized the liners blue. I sharpened about 1in of the false edge, but it tapers so none of the sharpened part sticks out of the handle. The overall length is 8-1/4in and the thickness is 1/2.
Let me know what you think.
Regards,
Chuck
The blade is 3-3/4in long made of CPM 154 with a hand rubbed satin finish. The bolsters are 416 stainless that I stippled, I stippled the thumbstud as well. I also hid the bolster screws and blended them in with the stippling. The scales are black linen micarta and the liners are titanium. I anodized the liners blue. I sharpened about 1in of the false edge, but it tapers so none of the sharpened part sticks out of the handle. The overall length is 8-1/4in and the thickness is 1/2.
Let me know what you think.
Regards,
Chuck