Damascus fighter

Dan Seaver

KNIFE MAKER
Materials:
1084FG and 15n20 explosion pattern damascus
Stabilized amboyna burl with brass pins

Specs:
10.25" OAL
5.75" tip to plunge
1.1" wide
0.11" thick with a distal taper

The sheath is black 8oz leather with an inlay of white stingray. Since I am still new to sheath making; there are a few aesthetic mistakes on the sheath but nothing that will effect its use. I offer a 100% money back guarantee if your not happy with the knife.

$340 shipped

-005.jpg

-006.jpg

-009.jpg

-007.jpg

-008.jpg

firstinlaysheath001.jpg

firstinlaysheath002.jpg


Thanks for looking!
 
Last edited:
Dan, That's a very nice knife, as a good fighter should be, the width of the blade being less than an 1/8" and distal taper make for faster manuvering of the blade while in use for its intended purpose. Not a bad job on the sheath either. :thumbup:
 
Dan, That's a very nice knife, as a good fighter should be, the width of the blade being less than an 1/8" and distal taper make for faster manuvering of the blade while in use for its intended purpose. Not a bad job on the sheath either. :thumbup:

Thanks T, the blade is so light it feels like the only weight is from the handle when its in your hand.
 
From now to January first I will take $280 shipped within the US or $290 anywhere in the world. After that its back to $340.
 
Back
Top