Keith Willis
Well-Known Member
This knife has been one big headach,not sure why,there's nothing special about it.
This is the same design,I have always made,but it fought me from start to finish.
Closed: 3 5/8"
Open: 6 3/8"
Scales: Stabilized Black Palm and CF bolsters and G-10 spine
Blade: Flatground 1095.The etch looked real nice,until I had to do
a little more sanding,on the spine.I did a second etch,and to me it looks bad.
What say you??
Thanks for looking.
I sanded the etch off.Take a look at pic 1&2,had to use 280,then 600 grit to finish
God bless,Keith
This is the same design,I have always made,but it fought me from start to finish.
Closed: 3 5/8"
Open: 6 3/8"
Scales: Stabilized Black Palm and CF bolsters and G-10 spine
Blade: Flatground 1095.The etch looked real nice,until I had to do
a little more sanding,on the spine.I did a second etch,and to me it looks bad.
What say you??
Thanks for looking.
I sanded the etch off.Take a look at pic 1&2,had to use 280,then 600 grit to finish
God bless,Keith
Attachments
Last edited: