T88 Cure/working time question

Hey guys, I'm starting my second knife. Its a drop point with micarta scales. I did a little pre-shaping and then glued and clamped up one side. The package says 60 minute gel time and 24-36hr full cure at 77F. Do I have to wait the full 24-36hr before I start doing more sanding?


On a side note, i'm pretty sure I bought black micarta, but working it, it looks more green. Is this common, or did I get the wrong color? I dont care either way, was just curious.

No you don't have to wait that long. Nearly every adhesive will tell you reaches full strength after 24 hours but most can be worked in an hour or two.

Thats what I needed to know! Thanks