just finished #4

J.Leclair

Well-Known Member
On a bit of a roll here. This is on I made for my wife and have been draging my feet in finishing. it's 7.5 inches OAL with a 4" BL steel Is 3/16" 440c hollow ground on a 10"wheel. full length swedge also ground on the 10" wheel. handles are purpleheart with green and purple liners and stainless pins. 3 coats of tung oil sanded to 600 grit between coats.

the sheath is 8oz veggi tan dye'd dark brown. I tried my hand at some tooling for the first time. only had an exacto blade to work with so dont think I did too badly. no strap on the sheath because my wife will carry it in her purse


DSCN0937.jpg


DSCN0934.jpg


DSCN0932.jpg


DSCN0930.jpg


DSCN0928.jpg


DSCN0925.jpg


DSCN0923.jpg


DSCN0922.jpg


DSCN0921.jpg
 
Last edited:
Back
Top