Ole Jezabelle

Andrew Takach

Well-Known Member
this one was named by the new owner. I forged it from some 3/4'' x 1 1/4'' W2 stock I recieved from yours truely the nj baroness.....I mean nj baron :p

I must say, I was directly inspired by the "cloud cutter" I believe done by D Fogg and J Fikes , so it is very similar but still in its own way unique, as my interpretation.

Over all it was about 34'' with a 16'' blade. I rounded off the entire spine except for the sharpened top clip, and gave it a full tapered tang. The blade also had a full taper, making it balanced very nicely.

It was clayed up and quenched in Parks then rubbed to 800grit, didnt make sense to hand rub any farther as I knew the new owner was going to be really putting it to work pretty hard as soon as he recieved it. Even at 800grit I was still very satisfyed with the hamon activity.

thanks for looking

197170_189897617719331_120263071349453_425199_1082740_n.jpg


196893_189897494386010_120263071349453_425194_6931095_n.jpg


197364_189897604385999_120263071349453_425198_6944370_n.jpg


200125_189897524386007_120263071349453_425195_2020468_n.jpg


200022_189897574386002_120263071349453_425197_2899794_n.jpg
 
Back
Top